8 open source boards using the LM7815_TO220

Real designs built with the LM7815_TO220, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the LM7815_TO220

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the LM7815_TO220 connects to, and the resistors, capacitors and other passives placed on it.

  • The VI pin has a capacitor to GND on 4 of 7 designs, most often 4.7 mF (then 10 µF).
VIpin 1Connected to: Signal 71% · 24V 29%
  • Capacitor to GND on 57% · 4.7 mF (3), 10 µF (2), 100 nF (1)
GNDpin 2Connected to: GND 86%

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Half bridge by profdc9, Half bridge by iduwhux, Esp32 patch bay circuit by james-l-key and Headphone power by larsimmisch.

The LM7815_TO220 in open source designs

The gallery holds 8 open source boards using the LM7815_TO220 from 8 GitHub repositories; a typical one measures about 97 × 73 mm and carries around 77 components.

75% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Half bridge by profdc9.

Microcontrollers on boards using the LM7815_TO220

What boards using the LM7815_TO220 are built for

LM7815_TO220: common questions

Where can I find a LM7815_TO220 reference design?

Each of the 8 boards on this page is a real design using the LM7815_TO220. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LM7815_TO220 VI pin connected?

The VI pin has a capacitor to GND on 4 of 7 designs, most often 4.7 mF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the LM7815_TO220.

What parts are used alongside the LM7815_TO220?

The LM7805_TO220, 40106, 4N28, LM339 and LM7905_TO220 appear in the most repositories here.

Which microcontrollers do boards using the LM7815_TO220 use?

Most are built on AVR/Arduino (1) and ESP32 (1).

How big is a typical board using the LM7815_TO220?

The median is 97 × 73 mm, and 75% are two-layer designs.

What is the most popular open source board using the LM7815_TO220?

By GitHub stars, Half bridge by profdc9, with 56 stars.

Can I simulate one of these boards using the LM7815_TO220 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part