16 open source boards using the LM7905_TO220
Real designs built with the LM7905_TO220, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
SCOPETREX
schlae
177.8 × 127 mm197 parts2LNo license245TI99 22
danwerner21
350 × 224.3 mm242 parts2LNo license50RP2040/RP2350
Mega IIe
baldengineer
163 × 174.4 mm307 parts4LMIT33IbmPS1 ISA-RISER
retrotheory
162.8 × 51.5 mm11 parts2LNo license8RP2040/RP2350
Iosefka motherboard
GlobalSequence
213 × 128.5 mm122 parts2LNo license56809 Plus EPROM Version
roberto314
248.9 × 139.7 mm165 parts2LBSD-2-Clause1Laser driver v3 Power
scular-HCC
261.3 × 165.2 mm273 parts2LCustom license0SCOPETREX
magikghost
177.8 × 127 mm197 parts2LNo license0ESP32
Esp32 patch bay circuit
james-l-key
165 × 119.5 mm187 parts4LMIT0ADR1399
mirtcho
107.5 × 55.5 mm89 parts4LNo license0ISA8888
DartFrogTek
169.3 × 98.2 mm70 parts2LMIT18Iosefka controlboard
GlobalSequence
213 × 128.5 mm74 parts2LNo license5GIMIX 6809 CPU Plus
roberto314
248.9 × 139.7 mm165 parts2LBSD-2-Clause1ISA8888 Test3
DartFrogTek
154.9 × 106.2 mm70 parts2LMIT18IO Prototype (aka Slot)
baldengineer
94.8 × 64.6 mm37 parts2LMIT33Power module
theWickedWebDev
100.1 × 38.9 mm20 parts2LNo license0
How designs wire the LM7905_TO220
Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the LM7905_TO220 connects to, and the resistors, capacitors and other passives placed on it.
- The VO pin has a decoupling capacitor on 5 of 12 designs, most often 100 nF (then 10 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1 | Connected to: GND 92% | — |
| VIpin 2 | Connected to: -12V 67% · a signal 33% |
|
| VOpin 3 | Connected to: -5V 67% · a signal 33% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SCOPETREX by schlae, TI99 22 by danwerner21, IO Prototype (aka Slot) by baldengineer and ISA8888 by DartFrogTek.
The LM7905_TO220 in open source designs
The gallery holds 16 open source boards using the LM7905_TO220 from 12 GitHub repositories; a typical one measures about 173.6 × 127 mm and carries around 144 components.
81% are two-layer designs, the rest use four layers or more, and 44% carry an open source license.
The most starred is SCOPETREX by schlae.
Parts used alongside the LM7905_TO220
Microcontrollers on boards using the LM7905_TO220
What boards using the LM7905_TO220 are built for
LM7905_TO220: common questions
Where can I find a LM7905_TO220 reference design?
Each of the 16 boards on this page is a real design using the LM7905_TO220. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LM7905_TO220 VO pin?
The VO pin has a decoupling capacitor on 5 of 12 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 12 open source designs using the LM7905_TO220.
What parts are used alongside the LM7905_TO220?
The 74LS00, 74LS32, LM7805_TO220, 4066 and 74LS04 appear in the most repositories here.
Which microcontrollers do boards using the LM7905_TO220 use?
Most are built on RP2040/RP2350 (2) and ESP32 (1).
How big is a typical board using the LM7905_TO220?
The median is 173.6 × 127 mm, and 81% are two-layer designs.
What is the most popular open source board using the LM7905_TO220?
By GitHub stars, SCOPETREX by schlae, with 245 stars.
Can I simulate one of these boards using the LM7905_TO220 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.