13 open source boards using the ADAU1701
Real designs built with the ADAU1701, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FreeDSP-ALLinONE
freeDSP
154.1 × 95.1 mm201 parts2LNo license16FreeDSP Catamaran
freeDSP
100 × 100 mm243 parts2LCC0-1.011FreeDSP-CLASSIC-SMD-A
freeDSP
70.4 × 84.4 mm89 parts2LNo license7FreeDSP Classic SMD AB plus-II
CyberPit
134 × 109.5 mm225 parts2LNo license6FreeDSP-FreeDSP SMD AB
CyberPit
100 × 100 mm190 parts2LCC-BY-SA-4.06FreeDSP-CLASSIC-SMD-B
freeDSP
67.3 × 92.3 mm170 parts2LCC-BY-SA-4.05ESP32
Uberamp1
DeepSOIC
130 × 82 mm520 parts2LNo license3Dsp amp 2to4
kurozz
84 × 90 mm175 parts2LNo license3ADAU1701-RPPico module
AkiyukiOkayasu
29.2 × 36.8 mm26 parts4LMIT0FreeDSP Catamaran.kicad PreRoute20220115
freeDSP
100 × 100 mm206 parts2LCC0-1.011FreeDSP Classic SMD
mischuja
67.3 × 92.3 mm170 parts2LGPL-3.01ESP32
Bluetooth Box V3
zOnlyKroks
64.5 × 74.8 mm119 parts4LCC0-1.00Adau1701-breakout
zOnlyKroks
80 × 40.3 mm92 parts2LCC0-1.00
How designs wire the ADAU1701
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the ADAU1701 connects to, and the resistors, capacitors and other passives placed on it.
- The PLL_LF pin has a capacitor to the supply on 11 of 11 designs, most often 3.3 nF.
- The CM pin has a capacitor to GND on 11 of 11 designs, most often 10 µF (then 100 nF).
- The FILTD pin has a capacitor to GND on 11 of 11 designs, most often 10 µF (then 100 nF).
- The FILTA pin has a capacitor to GND on 11 of 11 designs, most often 10 µF (then 100 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| AGNDpin 1, 37, 42 | Connected to: GND 100% | — |
| ADC0pin 2 | Connected to: Signal 100% |
|
| ADC_RESpin 3 | Connected to: Signal 100% |
|
| ADC1pin 4 | Connected to: Signal 100% |
|
| RESETpin 5 | Connected to: A connector 91% |
|
| SELFBOOTpin 6 | Connected to: 3.3V 82% | — |
| ADDR0pin 7 | Connected to: GND 91% | — |
| DGNDpin 12, 25 | Connected to: GND 100% | — |
| DVDDpin 13, 24 | Connected to: Signal 82% · 1.5V 18% |
|
| MP10pin 16 | Connected to: A connector 55% |
|
| VDRIVEpin 17 | Connected to: Signal 91% |
|
| IOVDDpin 18 | Connected to: 3.3V 100% |
|
| ADDR1/CDATA/WBpin 20 | Connected to: Signal 55% · not connected 36% |
|
| CLATCH/WPpin 21 | Connected to: A connector 45% |
|
| SDA/COUTpin 22 | Connected to: A connector 100%, 24AA256SN 27% |
|
| SCL/CCLKpin 23 | Connected to: A connector 100%, 24AA256 36%, 24AA256SN 27% |
|
| RSVDpin 30 | Connected to: GND 100% | — |
| OSCOpin 31 | Connected to: Signal 55% · not connected 45% |
|
| MCLKIpin 32 | Connected to: A connector 36% |
|
| PGNDpin 33 | Connected to: GND 100% | — |
| PVDDpin 34 | Connected to: 3.3V 100% |
|
| PLL_LFpin 35 | Connected to: Signal 100% |
|
| AVDDpin 36, 48 | Connected to: 3.3V 100% |
|
| PLL_MODE0pin 38 | Connected to: GND 55% · 3.3V 36% |
|
| PLL_MODE1pin 39 | Connected to: 3.3V 82% | — |
| CMpin 40 | Connected to: Signal 100% |
|
| FILTDpin 41 | Connected to: Signal 100% |
|
| VOUT3pin 43 | Connected to: Signal 100% |
|
| VOUT2pin 44 | Connected to: Signal 100% |
|
| VOUT1pin 45 | Connected to: Signal 100% |
|
| VOUT0pin 46 | Connected to: Signal 100% |
|
| FILTApin 47 | Connected to: Signal 100% |
|
11 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP-ALLinONE by freeDSP, FreeDSP Catamaran by freeDSP, FreeDSP-CLASSIC-SMD-A by freeDSP and FreeDSP Classic SMD AB plus-II by CyberPit.
The ADAU1701 in open source designs
The gallery holds 13 open source boards using the ADAU1701 from 11 GitHub repositories; a typical one measures about 84 × 92.3 mm and carries around 175 components.
85% are two-layer designs, the rest use four layers or more, and 62% carry an open source license.
The most starred is FreeDSP-ALLinONE by freeDSP.
Parts used alongside the ADAU1701
Microcontrollers on boards using the ADAU1701
What boards using the ADAU1701 are built for
ADAU1701: common questions
Where can I find a ADAU1701 reference design?
Each of the 13 boards on this page is a real design using the ADAU1701. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the ADAU1701 PLL_LF pin connected?
The PLL_LF pin has a capacitor to the supply on 11 of 11 designs, most often 3.3 nF. Counted from the KiCad layouts of 11 open source designs using the ADAU1701.
How is the ADAU1701 CM pin connected?
The CM pin has a capacitor to GND on 11 of 11 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 11 open source designs using the ADAU1701.
How is the ADAU1701 FILTD pin connected?
The FILTD pin has a capacitor to GND on 11 of 11 designs, most often 10 µF (then 100 nF). Counted from the KiCad layouts of 11 open source designs using the ADAU1701.
What parts are used alongside the ADAU1701?
The 24AA256, 24AA256SN, AZ1117-ADJ, LME49720 and IDT2305NZ appear in the most repositories here.
Which microcontrollers do boards using the ADAU1701 use?
Most are built on ESP32 (2).
How big is a typical board using the ADAU1701?
The median is 84 × 92.3 mm, and 85% are two-layer designs.
What is the most popular open source board using the ADAU1701?
By GitHub stars, FreeDSP-ALLinONE by freeDSP, with 16 stars.
Can I simulate one of these boards using the ADAU1701 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.