8 open source boards using the 24AA256
Real designs built with the 24AA256, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FreeDSP Catamaran
freeDSP
100 × 100 mm243 parts2LCC0-1.011PIC
Keithley 199 Digital board
asanza
85 × 60 mm74 parts4LGPL-3.08FreeDSP-CLASSIC-SMD-A
freeDSP
70.4 × 84.4 mm89 parts2LNo license7FreeDSP Classic SMD AB plus-II
CyberPit
134 × 109.5 mm225 parts2LNo license6FreeDSP-FreeDSP SMD AB
CyberPit
100 × 100 mm190 parts2LCC-BY-SA-4.06PIC
Keithley 199 Digital board
Na55im
90 × 65 mm79 parts4LGPL-3.00FreeDSP Catamaran.kicad PreRoute20220115
freeDSP
100 × 100 mm206 parts2LCC0-1.011PIC
Frontpanel
Na55im
132.5 × 20.5 mm28 parts2LGPL-3.00
How designs wire the 24AA256
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the 24AA256 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 5 has a pull-up to 3.3V on 5 of 6 designs, most often 2.2 kΩ (then 1 kΩ).
- Pin 6 has a pull-up to 3.3V on 5 of 6 designs, most often 2.2 kΩ (then 1.75 kΩ).
- Pin 1 is tied to GND on 5 of 6 designs.
- Pin 2 is tied to GND on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: GND 83% · not connected 17% | — |
| Pin 2 | Connected to: GND 83% · a signal 17% | — |
| Pin 3 | Connected to: GND 83% · not connected 17% | — |
| Pin 4 | Connected to: GND 83% · a signal 17% | — |
| Pin 5 | Connected to: Signal 100% |
|
| Pin 6 | Connected to: ADAU1701 67%, a connector 67%, 24AA256 50% |
|
| Pin 7 | Connected to: Signal 83% · not connected 17% |
|
| Pin 8 | Connected to: 3.3V 83% · not connected 17% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include FreeDSP Catamaran by freeDSP, Keithley 199 Digital board by asanza, FreeDSP-CLASSIC-SMD-A by freeDSP and FreeDSP Classic SMD AB plus-II by CyberPit.
The 24AA256 in open source designs
The gallery holds 8 open source boards using the 24AA256 from 6 GitHub repositories; a typical one measures about 100 × 92.2 mm and carries around 140 components.
75% are two-layer designs, the rest use four layers or more, and 75% carry an open source license.
The most starred is FreeDSP Catamaran by freeDSP.
Parts used alongside the 24AA256
Microcontrollers on boards using the 24AA256
What boards using the 24AA256 are built for
24AA256: common questions
Where can I find a 24AA256 reference design?
Each of the 8 boards on this page is a real design using the 24AA256. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the 24AA256 pin 5?
Pin 5 has a pull-up to 3.3V on 5 of 6 designs, most often 2.2 kΩ (then 1 kΩ). Counted from the KiCad layouts of 6 open source designs using the 24AA256.
What pull-up resistor is used on the 24AA256 pin 6?
Pin 6 has a pull-up to 3.3V on 5 of 6 designs, most often 2.2 kΩ (then 1.75 kΩ). Counted from the KiCad layouts of 6 open source designs using the 24AA256.
How is the 24AA256 pin 1 connected?
Pin 1 is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the 24AA256.
What parts are used alongside the 24AA256?
The ADAU1701, AZ1117-ADJ, LME49720, 4050 and FT230X appear in the most repositories here.
Which microcontrollers do boards using the 24AA256 use?
Most are built on PIC (3).
How big is a typical board using the 24AA256?
The median is 100 × 92.2 mm, and 75% are two-layer designs.
What is the most popular open source board using the 24AA256?
By GitHub stars, FreeDSP Catamaran by freeDSP, with 11 stars.
Can I simulate one of these boards using the 24AA256 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.