2 open source boards using the SN74LVC1G3157DTBR
Real designs built with the SN74LVC1G3157DTBR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenFC-Lite-Mini
OpenDrone-hw
26.9 × 26.9 mm97 parts6LCERN-OHL-S-2.0104
OpenFC-Lite
37.9 × 37.9 mm107 parts6LCERN-OHL-S-2.032
The SN74LVC1G3157DTBR in open source designs
The gallery holds 2 open source boards using the SN74LVC1G3157DTBR from 2 GitHub repositories; a typical one measures about 32.4 × 32.4 mm and carries around 102 components.
100% use four copper layers or more, and 100% carry an open source license.
The most starred is OpenFC-Lite-Mini by OpenDrone-hw.
Parts used alongside the SN74LVC1G3157DTBR
What boards using the SN74LVC1G3157DTBR are built for
SN74LVC1G3157DTBR: common questions
Where can I find a SN74LVC1G3157DTBR reference design?
Each of the 2 boards on this page is a real design using the SN74LVC1G3157DTBR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SN74LVC1G3157DTBR?
The BMI270, COS8051SOT, LP5912-1.8DRVR, LP5912-3.3DRVR and SM06B-SRSS-TB(LF)(SN) appear in the most repositories here.
How big is a typical board using the SN74LVC1G3157DTBR?
The median is 32.4 × 32.4 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74LVC1G3157DTBR?
By GitHub stars, OpenFC-Lite-Mini by OpenDrone-hw, with 104 stars.
Can I simulate one of these boards using the SN74LVC1G3157DTBR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.