9 open source boards using the TS2306A 240gf MSM 9

Real designs built with the TS2306A 240gf MSM 9, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the TS2306A 240gf MSM 9

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TS2306A 240gf MSM 9 connects to, and the resistors, capacitors and other passives placed on it.

  • The 1_1 pin is tied to GND on 5 of 6 designs.
  • The 2_2 pin has a series resistor on 3 of 6 designs, most often 10 kΩ.
1_1pin 1Connected to: GND 83% · a signal 17%
2_2pin 2Connected to: The microcontroller 33% · GND 17%
  • Series resistor on 50% · 10 kΩ (3)
  • Pull-up to 3.3V on 33% · 10 kΩ (2)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenFC-Lite-Mini by OpenDrone-hw, OpenFC-Lite by OpenDrone-hw, OpenAIO by OpenDrone-hw and OpenRX-Gemini by OpenDrone-hw.

The TS2306A 240gf MSM 9 in open source designs

The gallery holds 9 open source boards using the TS2306A 240gf MSM 9 from 6 GitHub repositories; a typical one measures about 32 × 35 mm and carries around 97 components.

100% use four copper layers or more, and 44% carry an open source license.

The most starred is OpenFC-Lite-Mini by OpenDrone-hw.

Microcontrollers on boards using the TS2306A 240gf MSM 9

TS2306A 240gf MSM 9: common questions

Where can I find a TS2306A 240gf MSM 9 reference design?

Each of the 9 boards on this page is a real design using the TS2306A 240gf MSM 9. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the TS2306A 240gf MSM 9 1_1 pin connected?

The 1_1 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the TS2306A 240gf MSM 9.

What resistor goes on the TS2306A 240gf MSM 9 2_2 pin?

The 2_2 pin has a series resistor on 3 of 6 designs, most often 10 kΩ. Counted from the KiCad layouts of 6 open source designs using the TS2306A 240gf MSM 9.

What parts are used alongside the TS2306A 240gf MSM 9?

The SM06B-SRSS-TB(LF)(SN), BMI270, COS8051SOT, LMR51430YFDDCR and LP5912-1.8DRVR appear in the most repositories here.

Which microcontrollers do boards using the TS2306A 240gf MSM 9 use?

Most are built on ESP32 (5) and STM32 (1).

How big is a typical board using the TS2306A 240gf MSM 9?

The median is 32 × 35 mm, and 0% are two-layer designs.

What is the most popular open source board using the TS2306A 240gf MSM 9?

By GitHub stars, OpenFC-Lite-Mini by OpenDrone-hw, with 104 stars.

Can I simulate one of these boards using the TS2306A 240gf MSM 9 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part