8 open source boards using the SM06B-SRSS-TB(LF)(SN)
Real designs built with the SM06B-SRSS-TB(LF)(SN), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
OpenFC-Lite-Mini
OpenDrone-hw
26.9 × 26.9 mm97 parts6LCERN-OHL-S-2.0104OpenFC-Lite
OpenDrone-hw
37.9 × 37.9 mm107 parts6LCERN-OHL-S-2.032ESP32
OpenAIO
OpenDrone-hw
35 × 35 mm244 parts8LCERN-OHL-S-2.05ESP32
DrikrAIO
tetraethylmethane
50 × 50 mm339 parts6LNo license1ESP32
Pace racer hardware
rammp-org
0 × 0 mm118 parts4LNo license0STM32
SPAR
HazzerTheGreat
48 × 58 mm104 parts6LNo license0ESP32
OpenAIO
tetraethylmethane
35 × 35 mm244 parts8LNo license1OpenFC
tetraethylmethane
26.9 × 26.9 mm97 parts6LNo license1
How designs wire the SM06B-SRSS-TB(LF)(SN)
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the SM06B-SRSS-TB(LF)(SN) connects to, and the resistors, capacitors and other passives placed on it.
- The 1_1 pin is tied to 10V on 5 of 6 designs.
- The 2_2 pin is tied to GND on 5 of 6 designs.
- The 5_5 pin is tied to GND on 5 of 6 designs.
- The 7_7 pin is tied to GND on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| 1_1pin 1 | Connected to: 10V 83% · a signal 17% | — |
| 2_2pin 2 | Connected to: GND 83% · a signal 17% | — |
| 5_5pin 5 | Connected to: GND 83% · 3.3V 17% | — |
| 7_7pin 7 | Connected to: GND 83% · not connected 17% | — |
| 8_8pin 8 | Connected to: GND 83% · not connected 17% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenFC-Lite-Mini by OpenDrone-hw, OpenFC-Lite by OpenDrone-hw, OpenAIO by OpenDrone-hw and DrikrAIO by tetraethylmethane.
The SM06B-SRSS-TB(LF)(SN) in open source designs
The gallery holds 8 open source boards using the SM06B-SRSS-TB(LF)(SN) from 6 GitHub repositories; a typical one measures about 35 × 35 mm and carries around 113 components.
100% use four copper layers or more, and 38% carry an open source license.
The most starred is OpenFC-Lite-Mini by OpenDrone-hw.
Parts used alongside the SM06B-SRSS-TB(LF)(SN)
What boards using the SM06B-SRSS-TB(LF)(SN) are built for
SM06B-SRSS-TB(LF)(SN): common questions
Where can I find a SM06B-SRSS-TB(LF)(SN) reference design?
Each of the 8 boards on this page is a real design using the SM06B-SRSS-TB(LF)(SN). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the SM06B-SRSS-TB(LF)(SN) 1_1 pin connected?
The 1_1 pin is tied to 10V on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SM06B-SRSS-TB(LF)(SN).
How is the SM06B-SRSS-TB(LF)(SN) 2_2 pin connected?
The 2_2 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SM06B-SRSS-TB(LF)(SN).
How is the SM06B-SRSS-TB(LF)(SN) 5_5 pin connected?
The 5_5 pin is tied to GND on 5 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the SM06B-SRSS-TB(LF)(SN).
What parts are used alongside the SM06B-SRSS-TB(LF)(SN)?
The TS2306A 240gf MSM 9, BMI270, COS8051SOT, LMR51430YFDDCR and LP5912-1.8DRVR appear in the most repositories here.
Which microcontrollers do boards using the SM06B-SRSS-TB(LF)(SN) use?
Most are built on ESP32 (4) and STM32 (1).
How big is a typical board using the SM06B-SRSS-TB(LF)(SN)?
The median is 35 × 35 mm, and 0% are two-layer designs.
What is the most popular open source board using the SM06B-SRSS-TB(LF)(SN)?
By GitHub stars, OpenFC-Lite-Mini by OpenDrone-hw, with 104 stars.
Can I simulate one of these boards using the SM06B-SRSS-TB(LF)(SN) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.