3 open source boards using the LS30
Real designs built with the LS30, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
- schematic only · 97 parts
K-1013-floppy disk controller replica
eduardocasino
97 partsCustom license3 RP2040/RP2350
Midi controller
Tommie1236
100 × 100 mm515 parts4LCERN-OHL-W-2.02RP2040/RP2350
Faders
Tommie1236
160 × 130 mm348 parts2LCERN-OHL-W-2.02
The LS30 in open source designs
The gallery holds 3 open source boards using the LS30 from 2 GitHub repositories; a typical one measures about 130 × 115 mm and carries around 348 components.
50% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is K-1013-floppy disk controller replica by eduardocasino.
Microcontrollers on boards using the LS30
What boards using the LS30 are built for
LS30: common questions
Where can I find a LS30 reference design?
Each of the 3 boards on this page is a real design using the LS30. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LS30 use?
Most are built on RP2040/RP2350 (2).
How big is a typical board using the LS30?
The median is 130 × 115 mm, and 50% are two-layer designs.
What is the most popular open source board using the LS30?
By GitHub stars, K-1013-floppy disk controller replica by eduardocasino, with 3 stars.
Can I simulate one of these boards using the LS30 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.