5 open source boards using the LT3093xMSE
Real designs built with the LT3093xMSE, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
1fNoiseAmplifierRev13
curtisseizert
140 × 100 mm375 parts6LMIT35Oip opa818
aewallin
25 × 25 mm32 parts2LNo license32Oip opa818 alt
aewallin
25 × 25 mm32 parts2LNo license321" Photodetector - SOT23
aewallin
25 × 25 mm30 parts2LNo license32Circular2
aewallin
25 × 25 mm30 parts2LNo license32
The LT3093xMSE in open source designs
The gallery holds 5 open source boards using the LT3093xMSE from 2 GitHub repositories; a typical one measures about 25 × 25 mm and carries around 32 components.
80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is 1fNoiseAmplifierRev13 by curtisseizert.
Parts used alongside the LT3093xMSE
What boards using the LT3093xMSE are built for
LT3093xMSE: common questions
Where can I find a LT3093xMSE reference design?
Each of the 5 boards on this page is a real design using the LT3093xMSE. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the LT3093xMSE?
The median is 25 × 25 mm, and 80% are two-layer designs.
What is the most popular open source board using the LT3093xMSE?
By GitHub stars, 1fNoiseAmplifierRev13 by curtisseizert, with 35 stars.
Can I simulate one of these boards using the LT3093xMSE before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.