2 open source boards using the LTC3525-5
Real designs built with the LTC3525-5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
PSUtap digital
WEEE-Open
92 × 70.1 mm80 parts2LCERN-OHL-W-2.00AVR/Arduino
Invaders
anyahelene
127 × 88.9 mm53 parts2LNo license0
The LTC3525-5 in open source designs
The gallery holds 2 open source boards using the LTC3525-5 from 2 GitHub repositories; a typical one measures about 109.5 × 79.5 mm and carries around 67 components.
100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is PSUtap digital by WEEE-Open.
Microcontrollers on boards using the LTC3525-5
What boards using the LTC3525-5 are built for
LTC3525-5: common questions
Where can I find a LTC3525-5 reference design?
Each of the 2 boards on this page is a real design using the LTC3525-5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LTC3525-5 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the LTC3525-5?
The median is 109.5 × 79.5 mm, and 100% are two-layer designs.
What is the most popular open source board using the LTC3525-5?
By GitHub stars, PSUtap digital by WEEE-Open, with 0 stars.
Can I simulate one of these boards using the LTC3525-5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.