5 open source boards using the LTC6804-2
Real designs built with the LTC6804-2, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
LiBCM
doppelhub
355 × 160 mm706 parts4LCC-BY-SA-4.025AVR/Arduino
Nodo BMS
AugustoS97
149.2 × 83.7 mm107 parts2LGPL-3.07AVR/Arduino
Linsight
doppelhub
169.3 × 153 mm474 parts4LGPL-3.05AVR/Arduino
Slave Board
columbia-fsae
412.7 × 77.5 mm148 parts2LNo license1AVR/Arduino
Módulo RS485 a CAN para EP-SOLAR
AugustoS97
80 × 55.6 mm42 parts2LGPL-3.07
The LTC6804-2 in open source designs
The gallery holds 5 open source boards using the LTC6804-2 from 4 GitHub repositories; a typical one measures about 169.3 × 83.7 mm and carries around 148 components.
60% are two-layer designs, the rest use four layers or more, and 80% carry an open source license.
The most starred is LiBCM by doppelhub.
Microcontrollers on boards using the LTC6804-2
What boards using the LTC6804-2 are built for
LTC6804-2: common questions
Where can I find a LTC6804-2 reference design?
Each of the 5 boards on this page is a real design using the LTC6804-2. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the LTC6804-2 use?
Most are built on AVR/Arduino (4).
How big is a typical board using the LTC6804-2?
The median is 169.3 × 83.7 mm, and 60% are two-layer designs.
What is the most popular open source board using the LTC6804-2?
By GitHub stars, LiBCM by doppelhub, with 25 stars.
Can I simulate one of these boards using the LTC6804-2 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.