6 open source boards using the LTC6820
Real designs built with the LTC6820, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
LiBCM
doppelhub
355 × 160 mm706 parts4LCC-BY-SA-4.025AVR/Arduino
Linsight
doppelhub
169.3 × 153 mm474 parts4LGPL-3.05Accumulator Board
formulaslug
127 × 91.5 mm102 parts2LNo license5STM32
BPSMaster
corbosiny
100 × 75 mm174 parts2LNo license3TCB
TKG-Tou-Kai-Group
100 × 100 mm120 parts2LNo license0Accumulator Board
formulaslug
139.7 × 88.9 mm105 parts2LNo license2
How designs wire the LTC6820
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LTC6820 connects to, and the resistors, capacitors and other passives placed on it.
- The ICMP pin has a series resistor on 6 of 6 designs, most often 1 kΩ (then 1.5 kΩ).
- The ICMP pin has a resistor to GND on 6 of 6 designs, most often 1 kΩ (then 680 Ω).
- The IBIAS pin has a series resistor on 6 of 6 designs, most often 1 kΩ (then 1.5 kΩ).
- The MISO pin has a pull-up to 3.3V on 5 of 6 designs, most often 2.2 kΩ (then 1.24 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| ENpin 1 | Connected to: GND 50% · 3.3V 50% |
|
| MOSIpin 2 | Connected to: NUCLEO-L432KC 33% |
|
| MISOpin 3 | Connected to: NUCLEO-L432KC 33% |
|
| SCKpin 4 | Connected to: NUCLEO-L432KC 33% |
|
| V_DDSpin 6 | Connected to: 3.3V 100% |
|
| PHApin 8 | Connected to: 5V 67% · GND 33% | — |
| V_DDpin 9 | Connected to: 5V 100% |
|
| IMpin 10 | Connected to: Signal 100% |
|
| IPpin 11 | Connected to: Signal 100% |
|
| MSTRpin 12 | Connected to: 5V 100% | — |
| SLOWpin 13 | Connected to: GND 100% | — |
| GNDpin 14 | Connected to: GND 100% | — |
| ICMPpin 15 | Connected to: Signal 100% |
|
| IBIASpin 16 | Connected to: Signal 100% |
|
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include LiBCM by doppelhub, Linsight by doppelhub, Accumulator Board by formulaslug and BPSMaster by corbosiny.
The LTC6820 in open source designs
The gallery holds 6 open source boards using the LTC6820 from 6 GitHub repositories; a typical one measures about 133.3 × 95.8 mm and carries around 147 components.
67% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.
The most starred is LiBCM by doppelhub.
Parts used alongside the LTC6820
Microcontrollers on boards using the LTC6820
What boards using the LTC6820 are built for
LTC6820: common questions
Where can I find a LTC6820 reference design?
Each of the 6 boards on this page is a real design using the LTC6820. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the LTC6820 ICMP pin?
The ICMP pin has a series resistor on 6 of 6 designs, most often 1 kΩ (then 1.5 kΩ). Counted from the KiCad layouts of 6 open source designs using the LTC6820.
What resistor goes on the LTC6820 IBIAS pin?
The IBIAS pin has a series resistor on 6 of 6 designs, most often 1 kΩ (then 1.5 kΩ). Counted from the KiCad layouts of 6 open source designs using the LTC6820.
What pull-up resistor is used on the LTC6820 MISO pin?
The MISO pin has a pull-up to 3.3V on 5 of 6 designs, most often 2.2 kΩ (then 1.24 kΩ). Counted from the KiCad layouts of 6 open source designs using the LTC6820.
What parts are used alongside the LTC6820?
The HEF4093B, ISO1050DUB, LT1487, LTC6804-2 and MCP6004 appear in the most repositories here.
Which microcontrollers do boards using the LTC6820 use?
Most are built on AVR/Arduino (1) and STM32 (1).
How big is a typical board using the LTC6820?
The median is 133.3 × 95.8 mm, and 67% are two-layer designs.
What is the most popular open source board using the LTC6820?
By GitHub stars, LiBCM by doppelhub, with 25 stars.
Can I simulate one of these boards using the LTC6820 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.