11 open source boards using the LY68L6400SLIT

Real designs built with the LY68L6400SLIT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the LY68L6400SLIT

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the LY68L6400SLIT connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 2.2 µF).
CEpin 1Connected to: The microcontroller 100%
  • Series resistor on 33% · 10 kΩ (2), 100 kΩ (1)
VSSpin 4Connected to: GND 100%
VCCpin 8Connected to: 3.3V 78% · a signal 22%
  • Decoupling capacitor on 67% · 100 nF (6), 2.2 µF (2), 1 µF (2)

5 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ICEBreaker+++ by gregdavill, Pcb by FlipperMCE, Obsidian boa r0.1 by silvioviscuso and H7PI by Peize-Liu.

The LY68L6400SLIT in open source designs

The gallery holds 11 open source boards using the LY68L6400SLIT from 9 GitHub repositories; a typical one measures about 35.6 × 36 mm and carries around 54 components.

73% use four copper layers or more, and 45% carry an open source license.

The most starred is ICEBreaker+++ by gregdavill.

Parts used alongside the LY68L6400SLIT

Microcontrollers on boards using the LY68L6400SLIT

LY68L6400SLIT: common questions

Where can I find a LY68L6400SLIT reference design?

Each of the 11 boards on this page is a real design using the LY68L6400SLIT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the LY68L6400SLIT VCC pin?

The VCC pin has a decoupling capacitor on 6 of 9 designs, most often 100 nF (then 2.2 µF). Counted from the KiCad layouts of 9 open source designs using the LY68L6400SLIT.

What parts are used alongside the LY68L6400SLIT?

The AMS1117-3.3, ESP32-PICO-D4 and NCP167BMX330TBG appear in the most repositories here.

Which microcontrollers do boards using the LY68L6400SLIT use?

Most are built on ESP32 (5), RP2040/RP2350 (3), FPGA (1) and Raspberry Pi (1).

How big is a typical board using the LY68L6400SLIT?

The median is 35.6 × 36 mm, and 27% are two-layer designs.

What is the most popular open source board using the LY68L6400SLIT?

By GitHub stars, ICEBreaker+++ by gregdavill, with 178 stars.

Can I simulate one of these boards using the LY68L6400SLIT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part