6 open source boards using the MAX31865xTP
Real designs built with the MAX31865xTP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
StealthBurner CAN Main
CharlieYu4994
53 × 40 mm87 parts4LNo license10Integ Temp Current Pressure
lactobacil
57.5 × 38.4 mm43 parts2LApache-2.06AVR/Arduino
TEC2
Oerdna
100 × 100 mm108 parts4LAGPL-3.01STM32
Serie
npgo22
160 × 136 mm512 parts6LNo license0ESP32
Caligula
ahsanu123
84.6 × 108.3 mm98 parts2LNo license0AVR/Arduino
SIGNAL
Oerdna
100 × 100 mm69 parts4LAGPL-3.01
How designs wire the MAX31865xTP
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MAX31865xTP connects to, and the resistors, capacitors and other passives placed on it.
- The BIAS pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 390 Ω).
- The REFIN+ pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 390 Ω).
- The REFIN- pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 390 Ω).
- The ISENSOR pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 390 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| BIASpin 1 | Connected to: Signal 100% |
|
| REFIN+pin 2 | Connected to: Signal 100% |
|
| REFIN-pin 3 | Connected to: Signal 100% |
|
| ISENSORpin 4 | Connected to: Signal 100% |
|
| RTDIN+pin 7 | Connected to: A connector 100% |
|
| RTDIN-pin 8 | Connected to: A connector 100% |
|
| FORCE-pin 9 | Connected to: A connector 100% |
|
| GNDpin 10, 16, 21 | Connected to: GND 100% | — |
| CSpin 13 | Connected to: The microcontroller 60% |
|
| DGNDpin 15 | Connected to: GND 100% | — |
| NCpin 17 | Connected to: Not connected 100% | — |
| DVDDpin 19 | Connected to: 3.3V 100% |
|
| VDDpin 20 | Connected to: 3.3V 60% · a signal 40% |
|
6 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include StealthBurner CAN Main by CharlieYu4994, Integ Temp Current Pressure by lactobacil, SIGNAL by Oerdna and Caligula by ahsanu123.
The MAX31865xTP in open source designs
The gallery holds 6 open source boards using the MAX31865xTP from 5 GitHub repositories; a typical one measures about 92.3 × 100 mm and carries around 93 components.
67% use four copper layers or more, and 50% carry an open source license.
The most starred is StealthBurner CAN Main by CharlieYu4994.
Parts used alongside the MAX31865xTP
Microcontrollers on boards using the MAX31865xTP
What boards using the MAX31865xTP are built for
MAX31865xTP: common questions
Where can I find a MAX31865xTP reference design?
Each of the 6 boards on this page is a real design using the MAX31865xTP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the MAX31865xTP BIAS pin?
The BIAS pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 390 Ω). Counted from the KiCad layouts of 5 open source designs using the MAX31865xTP.
What resistor goes on the MAX31865xTP REFIN+ pin?
The REFIN+ pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 390 Ω). Counted from the KiCad layouts of 5 open source designs using the MAX31865xTP.
What resistor goes on the MAX31865xTP REFIN- pin?
The REFIN- pin has a series resistor on 5 of 5 designs, most often 430 Ω (then 390 Ω). Counted from the KiCad layouts of 5 open source designs using the MAX31865xTP.
Which microcontrollers do boards using the MAX31865xTP use?
Most are built on AVR/Arduino (2), ESP32 (1), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the MAX31865xTP?
The median is 92.3 × 100 mm, and 33% are two-layer designs.
What is the most popular open source board using the MAX31865xTP?
By GitHub stars, StealthBurner CAN Main by CharlieYu4994, with 10 stars.
Can I simulate one of these boards using the MAX31865xTP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.