37 open source boards using the STM32F40X_LQFP64
Real designs built with the STM32F40X_LQFP64, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
MINI4
antonchromjak
65 × 18 mm151 parts4LNo license139STM32
Bldc
mrkindustries
38.5 × 65 mm124 parts2LNo license112STM32
MoxiE Control board
Teslafly
65 × 56 mm175 parts4LMIT5STM32
VESC-6
veazhang
62 × 60 mm143 parts4LNo license4STM32
Pcb pov3d
knielsen
98 × 90 mm95 parts4LNo license4STM32
Mattie
svenssonjoel
55 × 32 mm55 parts4LGPL-3.02STM32
E bike conversion kit
ansh1113
186.9 × 129.8 mm175 parts4LNo license1STM32
Ebike controller pcb compact
PetteriAimonen
77 × 30 mm143 parts4LNo license1STM32
SPACE-DRIVE
msglazer
62 × 60 mm143 parts4LNo license1STM32
Electrical
usernamegemaoa
38.5 × 65 mm124 parts2LNo license1STM32
Control remoto de silla de ruedas
i3dcor
38.5 × 65 mm123 parts2LAGPL-3.01STM32
V2 0
svenssonjoel
85 × 68 mm88 parts4LGPL-3.01STM32
TheLoveBoard
svenssonjoel
60 × 51.2 mm76 parts2LNo license1STM32
VESG
KoJZz
68.2 × 125.3 mm137 parts4LNo license0STM32
Bldc hardware
glocklueng
38.5 × 65 mm124 parts2LNo license0STM32
Skripsi bldc
8qbal
38.5 × 65 mm123 parts2LNo license0STM32
Besc hw
augustbering
39.9 × 97.5 mm120 parts4LNo license0STM32
Bldc hardware-1
koson
82 × 54 mm99 parts2LNo license0STM32
VESC-controller
paltatech
160 × 90 mm336 parts4LNo license356STM32
65x56 coming together
Teslafly
65 × 56 mm172 parts4LMIT5STM32
BLDC Driver 4.6
UofSSpaceTeam
75.2 × 49.3 mm112 parts2LNo license5STM32
Robot pcb0
svenssonjoel
61.9 × 57.8 mm77 parts2LGPL-3.01STM32
BLDC-STM32
H2O-Tnp
69.9 × 59.7 mm162 parts4LNo license0STM32
After remap - Copy
KoJZz
41.2 × 65 mm127 parts4LNo license0STM32
Before form factor change
Teslafly
68 × 59 mm172 parts4LMIT5STM32
BLDC 4
KoJZz
38.5 × 65 mm123 parts2LNo license0STM32
RFMote PA
vedderb
64 × 27 mm73 parts4LGPL-3.0145STM32
Before reduce net ties
Teslafly
65 × 56 mm172 parts4LMIT5STM32
Uwb
vedderb
56 × 34.5 mm53 parts2LGPL-3.0145STM32
Lowside gate vias placed
Teslafly
68 × 58 mm172 parts4LMIT5STM32
60x60 cap edge
Teslafly
68 × 58 mm171 parts4LMIT5STM32
Before blacklist try
Teslafly
68 × 58 mm171 parts4LMIT5STM32
Cap in middle thinner
Teslafly
68 × 58 mm171 parts4LMIT5STM32
Moxie drv powerstage layed out
Teslafly
68 × 58 mm166 parts4LMIT5STM32
Moxie drv straightfet cutout test2 splitcaps
Teslafly
90 × 45 mm153 parts4LMIT5STM32
Moxie drv sidecaps w tightshunts
Teslafly
68 × 58 mm151 parts4LMIT5
How designs wire the STM32F40X_LQFP64
Read from the KiCad layouts of 22 open source designs, one per repository: what each pin of the STM32F40X_LQFP64 connects to, and the resistors, capacitors and other passives placed on it.
- The PH0-OSC_IN pin has a capacitor to GND on 22 of 22 designs, most often 15 pF (then 22 pF).
- The PH0-OSC_IN pin has a crystal on 22 of 22 designs, most often 8 MHz.
- The PH1-OSC_OUT pin has a capacitor to GND on 22 of 22 designs, most often 15 pF (then 22 pF).
- The PH1-OSC_OUT pin has a crystal on 22 of 22 designs, most often 8 MHz.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VBATpin 1 | Connected to: VCC 95% |
|
| PC13_(RTC_AF1)pin 2 | Connected to: Not connected 77% · a signal 23% | — |
| PC14-OSC32_INpin 3 | Connected to: Not connected 82% · a signal 18% | — |
| PC15-OSC32_OUTpin 4 | Connected to: Not connected 86% | — |
| PH0-OSC_INpin 5 | Connected to: Signal 100% |
|
| PH1-OSC_OUTpin 6 | Connected to: Signal 100% |
|
| NRSTpin 7 | Connected to: A connector 82% |
|
| PC0(ADC123_IN10)pin 8 | Connected to: A connector 41% |
|
| PC2(ADC123_IN12)pin 10 | Connected to: Signal 91% |
|
| VSSApin 12 | Connected to: GND 100% | — |
| VDDApin 13 | Connected to: VCC 95% |
|
| PA0(ADC123_IN0/WKUP)pin 14 | Connected to: Signal 95% |
|
| PA1(ADC123_IN1)pin 15 | Connected to: Signal 100% |
|
| PA2(ADC123_IN2)pin 16 | Connected to: Signal 100% |
|
| PA3(ADC123_IN3)pin 17 | Connected to: Signal 73% · not connected 23% |
|
| VSSpin 18, 63 | Connected to: GND 100% | — |
| VDDpin 19, 32, 48, 64 | Connected to: VCC 100% |
|
| PC4(ADC12_IN14)pin 24 | Connected to: Signal 91% |
|
| PC5(ADC12_IN15)pin 25 | Connected to: A connector 27% |
|
| PB2-BOOT1pin 28 | Connected to: Not connected 86% | — |
| VCAP1pin 31 | Connected to: Signal 100% |
|
| PA11pin 44 | Connected to: Signal 100% |
|
| PA12pin 45 | Connected to: Signal 100% |
|
| VCAP2pin 47 | Connected to: Signal 100% |
|
| PA15(JTDI)pin 50 | Connected to: Not connected 77% · a signal 23% | — |
| PC11pin 52 | Connected to: Signal 86% |
|
| PD2pin 54 | Connected to: Not connected 73% · a signal 27% | — |
| PB3(JTDO/TRACESWO)pin 55 | Connected to: Not connected 73% · a signal 27% | — |
| PB4(NJTRST)pin 56 | Connected to: Not connected 68% · a signal 32% | — |
| PB5pin 57 | Connected to: Signal 77% · not connected 23% |
|
| PB6pin 58 | Connected to: Signal 91% |
|
| PB7pin 59 | Connected to: Signal 86% |
|
| BOOT0(VPP)pin 60 | Connected to: GND 73% · a signal 23% | — |
27 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include VESC-controller by paltatech, RFMote PA by vedderb, MINI4 by antonchromjak and Bldc by mrkindustries.
The STM32F40X_LQFP64 in open source designs
The gallery holds 37 open source boards using the STM32F40X_LQFP64 from 22 GitHub repositories; a typical one measures about 65 × 58 mm and carries around 143 components.
70% use four copper layers or more, and 49% carry an open source license.
The most starred is VESC-controller by paltatech.
Parts used alongside the STM32F40X_LQFP64
Microcontrollers on boards using the STM32F40X_LQFP64
What boards using the STM32F40X_LQFP64 are built for
STM32F40X_LQFP64: common questions
Where can I find a STM32F40X_LQFP64 reference design?
Each of the 37 boards on this page is a real design using the STM32F40X_LQFP64. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the STM32F40X_LQFP64 PH0-OSC_IN pin connected?
The PH0-OSC_IN pin has a capacitor to GND on 22 of 22 designs, most often 15 pF (then 22 pF). Counted from the KiCad layouts of 22 open source designs using the STM32F40X_LQFP64.
How is the STM32F40X_LQFP64 PH1-OSC_OUT pin connected?
The PH1-OSC_OUT pin has a capacitor to GND on 22 of 22 designs, most often 15 pF (then 22 pF). Counted from the KiCad layouts of 22 open source designs using the STM32F40X_LQFP64.
How is the STM32F40X_LQFP64 NRST pin connected?
The NRST pin has a capacitor to GND on 22 of 22 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 22 open source designs using the STM32F40X_LQFP64.
What parts are used alongside the STM32F40X_LQFP64?
The DRV8302, SN65HVD232, TC2117, TJA1051TK-3 and AD8418 appear in the most repositories here.
Which microcontrollers do boards using the STM32F40X_LQFP64 use?
Most are built on STM32 (37).
How big is a typical board using the STM32F40X_LQFP64?
The median is 65 × 58 mm, and 30% are two-layer designs.
What is the most popular open source board using the STM32F40X_LQFP64?
By GitHub stars, VESC-controller by paltatech, with 356 stars.
Can I simulate one of these boards using the STM32F40X_LQFP64 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.