3 open source boards using the MCP1700-3302E/TT
Real designs built with the MCP1700-3302E/TT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
PocketAdmin
krakrukra
15 × 31 mm25 parts2LMIT242STM32
LocalTrack
krakrukra
50 × 75 mm59 parts2LMIT18STM32
Fluxon
AcheronProject
241.6 × 71.7 mm151 parts2LCustom license8
The MCP1700-3302E/TT in open source designs
The gallery holds 3 open source boards using the MCP1700-3302E/TT from 3 GitHub repositories; a typical one measures about 50 × 71.7 mm and carries around 59 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is PocketAdmin by krakrukra.
Parts used alongside the MCP1700-3302E/TT
Microcontrollers on boards using the MCP1700-3302E/TT
What boards using the MCP1700-3302E/TT are built for
MCP1700-3302E/TT: common questions
Where can I find a MCP1700-3302E/TT reference design?
Each of the 3 boards on this page is a real design using the MCP1700-3302E/TT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MCP1700-3302E/TT use?
Most are built on STM32 (3).
How big is a typical board using the MCP1700-3302E/TT?
The median is 50 × 71.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP1700-3302E/TT?
By GitHub stars, PocketAdmin by krakrukra, with 242 stars.
Can I simulate one of these boards using the MCP1700-3302E/TT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.