2 open source boards using the MCP1754ST-3302E/MB
Real designs built with the MCP1754ST-3302E/MB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RPi-Hat-Thermocouple
mikelawrence
65 × 56 mm40 parts2LMIT9
RPi pHat-Thermocouple
65 × 30 mm54 parts2LMIT7
The MCP1754ST-3302E/MB in open source designs
The gallery holds 2 open source boards using the MCP1754ST-3302E/MB from 2 GitHub repositories; a typical one measures about 65 × 43 mm and carries around 47 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is RPi-Hat-Thermocouple by mikelawrence.
What boards using the MCP1754ST-3302E/MB are built for
MCP1754ST-3302E/MB: common questions
Where can I find a MCP1754ST-3302E/MB reference design?
Each of the 2 boards on this page is a real design using the MCP1754ST-3302E/MB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the MCP1754ST-3302E/MB?
The median is 65 × 43 mm, and 100% are two-layer designs.
What is the most popular open source board using the MCP1754ST-3302E/MB?
By GitHub stars, RPi-Hat-Thermocouple by mikelawrence, with 9 stars.
Can I simulate one of these boards using the MCP1754ST-3302E/MB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.