7 open source boards using the MCP23017-E/SS
Real designs built with the MCP23017-E/SS, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Zmk apple desktop bus keyboard
mattchesters
126.6 × 21.4 mm12 parts2LMIT165ESP32
Eumesmo 24V 16xIn/16xOut/1-Wire Module
thermseekr
128 × 67.8 mm320 parts4LCC-BY-NC-4.06ESP32
Wooden Clock - main board
tibm110 × 110 mm183 parts4LNo license14-Port-USB-Hub
yash-mehta13
55 × 65 mm54 parts4LNo license1- schematic only · 48 parts
AMBIENT
Sancte3D
48 partsNo license1 ESP32
E-GoCart
Obili69
128.4 × 70.9 mm105 parts4LNo license0ESP32
VCU3.0
milutintech
128.4 × 70.9 mm105 parts4LNo license0
How designs wire the MCP23017-E/SS
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the MCP23017-E/SS connects to, and the resistors, capacitors and other passives placed on it.
- The SCK pin has a pull-up to 3.3V on 5 of 6 designs, most often 2.2 kΩ (then 10 kΩ).
- The SDA pin has a pull-up to 3.3V on 5 of 6 designs, most often 2.2 kΩ (then 10 kΩ).
- The RESET pin has a pull-up to 3.3V on 5 of 6 designs, most often 7.5 kΩ (then 1 kΩ).
- The A0 pin is tied to GND on 5 of 6 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GPB0pin 1 | Connected to: Signal 100% |
|
| GPB1pin 2 | Connected to: A connector 33% |
|
| GPB2pin 3 | Connected to: A connector 33% |
|
| GPB3pin 4 | Connected to: A connector 33% |
|
| GPB4pin 5 | Connected to: Signal 100% |
|
| GPB5pin 6 | Connected to: Signal 83% · VBAT_DIV_EN 17% |
|
| GPB6pin 7 | Connected to: Signal 100% |
|
| GPB7pin 8 | Connected to: Signal 83% · not connected 17% |
|
| VDDpin 9 | Connected to: 3.3V 83% · a signal 17% |
|
| VSSpin 10 | Connected to: GND 83% · a signal 17% | — |
| NCpin 11, 14 | Connected to: Not connected 92% | — |
| SCKpin 12 | Connected to: The microcontroller 33%, a connector 33%, 776087-1 33% |
|
| SDApin 13 | Connected to: The microcontroller 33%, 776087-1 33%, ADS1015IDGST 33% · not connected 17% |
|
| A0pin 15 | Connected to: GND 83% · a signal 17% | — |
| A2pin 17 | Connected to: GND 67% · a signal 33% | — |
| RESETpin 18 | Connected to: Signal 83% · VCC 17% |
|
| GPA0pin 21 | Connected to: 776163-1 33% · not connected 17% |
|
| GPA1pin 22 | Connected to: 776163-1 33% · not connected 17% |
|
| GPA2pin 23 | Connected to: A connector 33%, 776163-1 33% |
|
| GPA3pin 24 | Connected to: A connector 33%, 776163-1 33% · DVDD 17% |
|
| GPA4pin 25 | Connected to: A connector 33%, 776163-1 33% · not connected 17% |
|
| GPA5pin 26 | Connected to: A connector 33%, 776163-1 33% · not connected 17% |
|
| GPA6pin 27 | Connected to: A connector 33%, 776163-1 33% · not connected 17% |
|
| GPA7pin 28 | Connected to: 776163-1 33% · not connected 33% |
|
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Zmk apple desktop bus keyboard by mattchesters, Eumesmo 24V 16xIn/16xOut/1-Wire Module by thermseekr, Wooden Clock - main board by tibm and 4-Port-USB-Hub by yash-mehta13.
The MCP23017-E/SS in open source designs
The gallery holds 7 open source boards using the MCP23017-E/SS from 7 GitHub repositories; a typical one measures about 127.3 × 69.3 mm and carries around 105 components.
83% use four copper layers or more, and 14% carry an open source license.
The most starred is Zmk apple desktop bus keyboard by mattchesters.
Parts used alongside the MCP23017-E/SS
Microcontrollers on boards using the MCP23017-E/SS
What boards using the MCP23017-E/SS are built for
MCP23017-E/SS: common questions
Where can I find a MCP23017-E/SS reference design?
Each of the 7 boards on this page is a real design using the MCP23017-E/SS. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the MCP23017-E/SS SCK pin?
The SCK pin has a pull-up to 3.3V on 5 of 6 designs, most often 2.2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP23017-E/SS.
What pull-up resistor is used on the MCP23017-E/SS SDA pin?
The SDA pin has a pull-up to 3.3V on 5 of 6 designs, most often 2.2 kΩ (then 10 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP23017-E/SS.
What pull-up resistor is used on the MCP23017-E/SS RESET pin?
The RESET pin has a pull-up to 3.3V on 5 of 6 designs, most often 7.5 kΩ (then 1 kΩ). Counted from the KiCad layouts of 6 open source designs using the MCP23017-E/SS.
What parts are used alongside the MCP23017-E/SS?
The 776087-1, 776163-1, ADS1015IDGST, BC817 and BTS716GB appear in the most repositories here.
Which microcontrollers do boards using the MCP23017-E/SS use?
Most are built on ESP32 (4).
How big is a typical board using the MCP23017-E/SS?
The median is 127.3 × 69.3 mm, and 17% are two-layer designs.
What is the most popular open source board using the MCP23017-E/SS?
By GitHub stars, Zmk apple desktop bus keyboard by mattchesters, with 165 stars.
Can I simulate one of these boards using the MCP23017-E/SS before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.