8 open source boards using the MIC23050-SYML-TR
Real designs built with the MIC23050-SYML-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Microchip SAM
PrecisionTimer RevG-1
SepticElectronics
84.3 × 50.8 mm99 parts4LGPL-3.00ESP32
MiniBot
DDeGonge
21.2 × 28 mm58 parts4LMIT40OreSat C3 Proxy Board
oresat
69.8 × 50 mm63 parts4LNo license1Microchip SAM
PrecisionTimer RevG
SepticElectronics
84.3 × 50.8 mm98 parts4LGPL-3.00Microchip SAM
PrecisionTimer RevF
SepticElectronics
84.3 × 50.8 mm91 parts4LGPL-3.00STM32
Apex Motherboard
Apex-Ottawa-Team
49.8 × 39 mm21 parts2LGPL-3.00Microchip SAM
PrecisionTimer RevF back
SepticElectronics
84.3 × 50.8 mm88 parts4LGPL-3.00Microchip SAM
PrecisionTimer RevF back2
SepticElectronics
84.3 × 50.8 mm88 parts4LGPL-3.00
The MIC23050-SYML-TR in open source designs
The gallery holds 8 open source boards using the MIC23050-SYML-TR from 4 GitHub repositories; a typical one measures about 84.3 × 50.8 mm and carries around 88 components.
88% use four copper layers or more, and 88% carry an open source license.
The most starred is MiniBot by DDeGonge.
Microcontrollers on boards using the MIC23050-SYML-TR
What boards using the MIC23050-SYML-TR are built for
MIC23050-SYML-TR: common questions
Where can I find a MIC23050-SYML-TR reference design?
Each of the 8 boards on this page is a real design using the MIC23050-SYML-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the MIC23050-SYML-TR use?
Most are built on Microchip SAM (5), ESP32 (1) and STM32 (1).
How big is a typical board using the MIC23050-SYML-TR?
The median is 84.3 × 50.8 mm, and 13% are two-layer designs.
What is the most popular open source board using the MIC23050-SYML-TR?
By GitHub stars, MiniBot by DDeGonge, with 40 stars.
Can I simulate one of these boards using the MIC23050-SYML-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.