3 open source boards using the MIC5528-3.3YMT

Real designs built with the MIC5528-3.3YMT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The MIC5528-3.3YMT in open source designs

The gallery holds 3 open source boards using the MIC5528-3.3YMT from 3 GitHub repositories; a typical one measures about 55 × 23 mm and carries around 76 components.

67% use four copper layers or more, and 67% carry an open source license.

The most starred is BenTo-Legacy by benkuper.

Microcontrollers on boards using the MIC5528-3.3YMT

Nordic nRF 1

What boards using the MIC5528-3.3YMT are built for

MIC5528-3.3YMT: common questions

Where can I find a MIC5528-3.3YMT reference design?

Each of the 3 boards on this page is a real design using the MIC5528-3.3YMT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MIC5528-3.3YMT use?

Most are built on Nordic nRF (1).

How big is a typical board using the MIC5528-3.3YMT?

The median is 55 × 23 mm, and 33% are two-layer designs.

What is the most popular open source board using the MIC5528-3.3YMT?

By GitHub stars, BenTo-Legacy by benkuper, with 1 stars.

Can I simulate one of these boards using the MIC5528-3.3YMT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.