2 open source boards using the MIC5842
Real designs built with the MIC5842, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoSplitflap controller board
nintando64
96 × 48 mm33 parts2LApache-2.00
AVR/ArduinoSplitflap controller board
orgTestCodacy11KRepos110MB
96 × 48 mm33 parts2LApache-2.00
The MIC5842 in open source designs
The gallery holds 2 open source boards using the MIC5842 from 2 GitHub repositories; a typical one measures about 96 × 48 mm and carries around 33 components.
100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is Splitflap controller board by nintando64.
Parts used alongside the MIC5842
Microcontrollers on boards using the MIC5842
What boards using the MIC5842 are built for
MIC5842: common questions
Where can I find a MIC5842 reference design?
Each of the 2 boards on this page is a real design using the MIC5842. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the MIC5842?
The 74HC165, arduino_uno_shield and WS2812B appear in the most repositories here.
Which microcontrollers do boards using the MIC5842 use?
Most are built on AVR/Arduino (2).
How big is a typical board using the MIC5842?
The median is 96 × 48 mm, and 100% are two-layer designs.
What is the most popular open source board using the MIC5842?
By GitHub stars, Splitflap controller board by nintando64, with 0 stars.
Can I simulate one of these boards using the MIC5842 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.