3 open source boards using the arduino_uno_shield
Real designs built with the arduino_uno_shield, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/ArduinoSand-Plotter
tim-callinan
68.6 × 53.3 mm15 parts2LNo license2
AVR/ArduinoSplitflap controller board
nintando64
96 × 48 mm33 parts2LApache-2.00
AVR/ArduinoSplitflap controller board
orgTestCodacy11KRepos110MB
96 × 48 mm33 parts2LApache-2.00
The arduino_uno_shield in open source designs
The gallery holds 3 open source boards using the arduino_uno_shield from 3 GitHub repositories; a typical one measures about 96 × 48 mm and carries around 33 components.
100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is Sand-Plotter by tim-callinan.
Microcontrollers on boards using the arduino_uno_shield
What boards using the arduino_uno_shield are built for
arduino_uno_shield: common questions
Where can I find a arduino_uno_shield reference design?
Each of the 3 boards on this page is a real design using the arduino_uno_shield. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the arduino_uno_shield?
The 74HC165, MIC5842 and WS2812B appear in the most repositories here.
Which microcontrollers do boards using the arduino_uno_shield use?
Most are built on AVR/Arduino (3).
How big is a typical board using the arduino_uno_shield?
The median is 96 × 48 mm, and 100% are two-layer designs.
What is the most popular open source board using the arduino_uno_shield?
By GitHub stars, Sand-Plotter by tim-callinan, with 2 stars.
Can I simulate one of these boards using the arduino_uno_shield before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.