12 open source boards using the MMDT2907A-7-F

Real designs built with the MMDT2907A-7-F, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the MMDT2907A-7-F

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the MMDT2907A-7-F connects to, and the resistors, capacitors and other passives placed on it.

  • The B1 pin has a resistor to GND on 12 of 12 designs, most often 100 kΩ.
  • The C2 pin has a resistor to GND on 12 of 12 designs, most often 100 kΩ.
  • The B2 pin has a resistor to GND on 12 of 12 designs, most often 100 kΩ.
  • The C1 pin has a resistor to GND on 12 of 12 designs, most often 100 kΩ.
E1pin 1Connected to: 3.3V 100%
B1pin 2Connected to: Signal 100%
  • Resistor to GND on 100% · 100 kΩ (12)
C2pin 3Connected to: Signal 100%
  • Resistor to GND on 100% · 100 kΩ (12)
E2pin 4Connected to: 3.3V 100%
B2pin 5Connected to: Signal 100%
  • Resistor to GND on 100% · 100 kΩ (12)
C1pin 6Connected to: DMP1045U-7 100%
  • Resistor to GND on 100% · 100 kΩ (12)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Whofi by jedarden-org, ESP32Marauder NetNinja by bpmcircuits, ESP32Marauder by yyewolf and Marauder-T-display-TTGO by AliHj98.

The MMDT2907A-7-F in open source designs

The gallery holds 12 open source boards using the MMDT2907A-7-F from 12 GitHub repositories; a typical one measures about 78.5 × 20.1 mm and carries around 45 components.

100% are two-layer designs, the rest use four layers or more, and 83% carry an open source license.

The most starred is Whofi by jedarden-org.

Parts used alongside the MMDT2907A-7-F

Microcontrollers on boards using the MMDT2907A-7-F

What boards using the MMDT2907A-7-F are built for

MMDT2907A-7-F: common questions

Where can I find a MMDT2907A-7-F reference design?

Each of the 12 boards on this page is a real design using the MMDT2907A-7-F. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the MMDT2907A-7-F B1 pin?

The B1 pin has a resistor to GND on 12 of 12 designs, most often 100 kΩ. Counted from the KiCad layouts of 12 open source designs using the MMDT2907A-7-F.

What resistor goes on the MMDT2907A-7-F C2 pin?

The C2 pin has a resistor to GND on 12 of 12 designs, most often 100 kΩ. Counted from the KiCad layouts of 12 open source designs using the MMDT2907A-7-F.

What resistor goes on the MMDT2907A-7-F B2 pin?

The B2 pin has a resistor to GND on 12 of 12 designs, most often 100 kΩ. Counted from the KiCad layouts of 12 open source designs using the MMDT2907A-7-F.

What parts are used alongside the MMDT2907A-7-F?

The AZ1117H-3.3TRE1, DMP1045U-7 and ESP32-WROOM-32E-N4 appear in the most repositories here.

Which microcontrollers do boards using the MMDT2907A-7-F use?

Most are built on ESP32 (12).

How big is a typical board using the MMDT2907A-7-F?

The median is 78.5 × 20.1 mm, and 100% are two-layer designs.

What is the most popular open source board using the MMDT2907A-7-F?

By GitHub stars, Whofi by jedarden-org, with 98 stars.

Can I simulate one of these boards using the MMDT2907A-7-F before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part