13 open source boards using the module_mpu6050

Real designs built with the module_mpu6050, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the module_mpu6050

Read from the KiCad layouts of 9 open source designs, one per repository: what each pin of the module_mpu6050 connects to, and the resistors, capacitors and other passives placed on it.

  • The XDA pin is left unconnected on 9 of 9 designs.
  • The XCL pin is left unconnected on 9 of 9 designs.
  • The INT pin is left unconnected on 7 of 9 designs (a signal on 2).
  • The ADD pin is left unconnected on 6 of 9 designs (GND on 2).
VCCpin 1Connected to: VCC 78% · a signal 22%
GNDpin 2Connected to: GND 89%
XDApin 5Connected to: Not connected 100%
XCLpin 6Connected to: Not connected 100%
ADDpin 7Connected to: Not connected 67% · GND 22%
INTpin 8Connected to: Not connected 78% · a signal 22%

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include JABURU 1.5 by equipeantares, Heracles.main by MUNAKATA-EPC, Auto by BraulioRom20 and Auto by BraulioRom20.

The module_mpu6050 in open source designs

The gallery holds 13 open source boards using the module_mpu6050 from 9 GitHub repositories; a typical one measures about 100 × 82.8 mm and carries around 26 components.

100% are two-layer designs, the rest use four layers or more, and 23% carry an open source license.

The most starred is Main Board by MUNAKATA-EPC.

Parts used alongside the module_mpu6050

Microcontrollers on boards using the module_mpu6050

What boards using the module_mpu6050 are built for

module_mpu6050: common questions

Where can I find a module_mpu6050 reference design?

Each of the 13 boards on this page is a real design using the module_mpu6050. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the module_mpu6050 XDA pin connected?

The XDA pin is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the module_mpu6050.

How is the module_mpu6050 XCL pin connected?

The XCL pin is left unconnected on 9 of 9 designs. Counted from the KiCad layouts of 9 open source designs using the module_mpu6050.

How is the module_mpu6050 INT pin connected?

The INT pin is left unconnected on 7 of 9 designs (a signal on 2). Counted from the KiCad layouts of 9 open source designs using the module_mpu6050.

Which microcontrollers do boards using the module_mpu6050 use?

Most are built on ESP32 (9) and NXP (3).

How big is a typical board using the module_mpu6050?

The median is 100 × 82.8 mm, and 100% are two-layer designs.

What is the most popular open source board using the module_mpu6050?

By GitHub stars, Main Board by MUNAKATA-EPC, with 3 stars.

Can I simulate one of these boards using the module_mpu6050 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part