4 open source boards using the MP2303ADN

Real designs built with the MP2303ADN, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

4 boardsClear filters|Most starred

The MP2303ADN in open source designs

The gallery holds 4 open source boards using the MP2303ADN from 4 GitHub repositories; a typical one measures about 47.3 × 43.5 mm and carries around 55 components.

50% are two-layer designs, the rest use four layers or more, and 25% carry an open source license.

The most starred is Stm32f103 FlyBoard by fademike.

Parts used alongside the MP2303ADN

Microcontrollers on boards using the MP2303ADN

MP2303ADN: common questions

Where can I find a MP2303ADN reference design?

Each of the 4 boards on this page is a real design using the MP2303ADN. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the MP2303ADN use?

Most are built on STM32 (3).

How big is a typical board using the MP2303ADN?

The median is 47.3 × 43.5 mm, and 50% are two-layer designs.

What is the most popular open source board using the MP2303ADN?

By GitHub stars, Stm32f103 FlyBoard by fademike, with 1 stars.

Can I simulate one of these boards using the MP2303ADN before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part