6 open source boards using the MT41K256M16TW-107

Real designs built with the MT41K256M16TW-107, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the MT41K256M16TW-107

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the MT41K256M16TW-107 connects to, and the resistors, capacitors and other passives placed on it.

  • The VREFDQ pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 220 nF).
  • The CK pins have a series resistor on 5 of 5 designs, most often 470 Ω (then 100 Ω).
  • The ZQ0 pin has a resistor to GND on 5 of 5 designs, most often 240 Ω.
  • The RESET pin has a resistor to GND on 5 of 5 designs, most often 10 kΩ (then 4.7 kΩ).
VDDQpin A1, A8, C1, C9, D2, E9, F1, H2, H9Connected to: 1.35V 80% · a signal 20%
  • Decoupling capacitor on 60% · 220 nF (55), 470 nF (12), 2.2 µF (11)
  • Capacitor on 40% · 100 nF (4)
VSSpin A9, B3, E1, G8, J2, J8, M1, M9, P1, P9, T1, T9Connected to: GND 100%
VSSQpin B1, B9, D1, D8, E2, E8, F9, G1, G9Connected to: GND 100%
VDDpin B2, D9, G7, K2, K8, N1, N9, R1, R9Connected to: 1.35V 80% · a signal 20%
  • Decoupling capacitor on 60% · 220 nF (64), 470 nF (11), 2.2 µF (9)
DQSUpin B7, C7Connected to: The microcontroller 60%, MCIMX6Y2CVM08AB 20%, MCIMX6Y2DVM09AB 20%
  • Series capacitor on 40% · 2.2 pF (6)
DQSLpin F3, G3Connected to: The microcontroller 60%, MCIMX6Y2CVM08AB 20%, MCIMX6Y2DVM09AB 20%
  • Series capacitor on 40% · 2.2 pF (6)
VREFDQpin H1Connected to: The microcontroller 40% · VREF 20%
  • Capacitor to GND on 100% · 100 nF (11), 220 nF (4), 10 nF (1)
  • Resistor to GND on 80% · 1.5 kΩ (2), 1 kΩ (2)
NC_(ODT1)pin J1Connected to: Not connected 60% · a signal 40%
CKpin J7, K7Connected to: The microcontroller 60%, MCIMX6Y2CVM08AB 20%, MCIMX6Y2DVM09AB 20%
  • Series resistor on 100% · 470 Ω (4), 100 Ω (4)
NC_(CKE1)pin J9Connected to: Not connected 60% · a signal 40%
CKE0pin K9Connected to: The microcontroller 60%
  • Resistor to GND on 80% · 10 kΩ (4)
NC_(CS1)pin L1Connected to: Not connected 60% · a signal 40%
ZQ0pin L8Connected to: Signal 100%
  • Resistor to GND on 100% · 240 Ω (5)
NC_(ZQ1)pin L9Connected to: Not connected 60% · a signal 40%
NC_(A15)pin M7Connected to: Not connected 60% · a signal 40%
VREFCApin M8Connected to: The microcontroller 40% · VREF 20%
  • Resistor to GND on 80% · 1.5 kΩ (2), 1 kΩ (2)
  • Capacitor to GND on 80% · 100 nF (9), 220 nF (4)
  • Pull-up to 1.35V on 60% · 1 kΩ (2), 1.5 kΩ (1)
RESETpin T2Connected to: The microcontroller 60%
  • Resistor to GND on 100% · 10 kΩ (4), 4.7 kΩ (1)

41 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include I.MX6 Demo Board by ts-manuel, STM32MP1 TestBoard RevB by cracked-machine, STM32MP1 TestBoard RevC by cracked-machine and I.MX 6ULL Bare Bones by a1wolfe.

The MT41K256M16TW-107 in open source designs

The gallery holds 6 open source boards using the MT41K256M16TW-107 from 5 GitHub repositories; a typical one measures about 80 × 75 mm and carries around 375 components.

100% use four copper layers or more, and 67% carry an open source license.

The most starred is IMX6 Demo Board from REF by ts-manuel.

Parts used alongside the MT41K256M16TW-107

Microcontrollers on boards using the MT41K256M16TW-107

What boards using the MT41K256M16TW-107 are built for

MT41K256M16TW-107: common questions

Where can I find a MT41K256M16TW-107 reference design?

Each of the 6 boards on this page is a real design using the MT41K256M16TW-107. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the MT41K256M16TW-107 VREFDQ pin connected?

The VREFDQ pin has a capacitor to GND on 5 of 5 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 5 open source designs using the MT41K256M16TW-107.

What resistor goes on the MT41K256M16TW-107 CK pin?

The CK pins have a series resistor on 5 of 5 designs, most often 470 Ω (then 100 Ω). Counted from the KiCad layouts of 5 open source designs using the MT41K256M16TW-107.

What resistor goes on the MT41K256M16TW-107 ZQ0 pin?

The ZQ0 pin has a resistor to GND on 5 of 5 designs, most often 240 Ω. Counted from the KiCad layouts of 5 open source designs using the MT41K256M16TW-107.

What parts are used alongside the MT41K256M16TW-107?

The KSZ8081RNBIA-TR, SE8233X2, SiP3250x and STM32MP157xAB appear in the most repositories here.

Which microcontrollers do boards using the MT41K256M16TW-107 use?

Most are built on STM32 (2) and FPGA (1).

How big is a typical board using the MT41K256M16TW-107?

The median is 80 × 75 mm, and 0% are two-layer designs.

What is the most popular open source board using the MT41K256M16TW-107?

By GitHub stars, IMX6 Demo Board from REF by ts-manuel, with 10 stars.

Can I simulate one of these boards using the MT41K256M16TW-107 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part