5 open source boards using the NodeMCU(ESP-32)
Real designs built with the NodeMCU(ESP-32), from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Metaversal glove
s0d1um
3.2 × 3.2 mm30 parts2LGPL-3.03ODMeter
LeonAbelmann
77 × 93 mm83 parts4LMIT1ODMeter
CameronBrooks11
77 × 93 mm83 parts4LMIT0ODMeter2.1
LeonAbelmann
77 × 93 mm83 parts4LMIT1ODMeter2.1
CameronBrooks11
77 × 93 mm83 parts4LMIT0
The NodeMCU(ESP-32) in open source designs
The gallery holds 5 open source boards using the NodeMCU(ESP-32) from 3 GitHub repositories; a typical one measures about 77 × 93 mm and carries around 83 components.
80% use four copper layers or more, and 100% carry an open source license.
The most starred is Metaversal glove by s0d1um.
Parts used alongside the NodeMCU(ESP-32)
What boards using the NodeMCU(ESP-32) are built for
NodeMCU(ESP-32): common questions
Where can I find a NodeMCU(ESP-32) reference design?
Each of the 5 boards on this page is a real design using the NodeMCU(ESP-32). Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the NodeMCU(ESP-32)?
The 74LVC125, ADM7150, ADS1115, LMR33630ADDA and Opamp_Quad_Generic appear in the most repositories here.
How big is a typical board using the NodeMCU(ESP-32)?
The median is 77 × 93 mm, and 20% are two-layer designs.
What is the most popular open source board using the NodeMCU(ESP-32)?
By GitHub stars, Metaversal glove by s0d1um, with 3 stars.
Can I simulate one of these boards using the NodeMCU(ESP-32) before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.