16 open source boards using the LMR33630ADDA
Real designs built with the LMR33630ADDA, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Exp control board
Coen-Lab
120.2 × 224.7 mm262 parts4LAGPL-3.03PS-MotorControllerInterface
lhr-solar
59.1 × 75.7 mm83 parts2LNo license3- schematic only · 139 partsESP32
GrowHub
Ajakovski
139 partsMIT2 ODMeter
LeonAbelmann
77 × 93 mm83 parts4LMIT1AVR/Arduino
Central control
adarwoo
103 × 107 mm147 parts4LNo license0STM32
Single-Esc for-BLDC-Motor
JulianTasche
70 × 70 mm94 parts2LNo license0STM32
Single-Esc for-BLDC-Motor
larshasstdas
70 × 70 mm94 parts2LNo license0Dlr carrier
arcnode-io
120 × 105 mm89 parts4LNo license0ODMeter
CameronBrooks11
77 × 93 mm83 parts4LMIT0EEE3088F-2025
ALECIA13
80 × 79 mm75 parts2LNo license0ESP32
ESP BMCU
mengxyz
31.2 × 99.6 mm74 parts2LGPL-3.00ESP32
Digital circuits
tyduszkaszok
70.4 × 48.2 mm73 parts2LNo license0ODMeter2.1
LeonAbelmann
77 × 93 mm83 parts4LMIT1ESP32
ClearBell Ausseneinheit
akoerner-dev
110 × 60 mm45 parts2LMIT1ODMeter2.1
CameronBrooks11
77 × 93 mm83 parts4LMIT0STM32
CANMD-60
RRST-NHK-Project
172 × 122 mm61 parts2LNo license0
How designs wire the LMR33630ADDA
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the LMR33630ADDA connects to, and the resistors, capacitors and other passives placed on it.
- The VIN pin has a decoupling capacitor on 13 of 13 designs, most often 10 µF (then 220 nF).
- The BOOT pin has a series capacitor on 13 of 13 designs, most often 100 nF (then 220 nF).
- The SW pin has a series capacitor on 13 of 13 designs, most often 100 nF (then 220 nF).
- The EN pin has a capacitor to GND on 12 of 13 designs, most often 10 µF (then 220 nF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 1, 9 | Connected to: GND 92% | — |
| VINpin 2 | Connected to: 24V 54% · a signal 46% |
|
| ENpin 3 | Connected to: A connector 23% · 24V 46% |
|
| PGpin 4 | Connected to: Signal 62% · not connected 38% |
|
| FBpin 5 | Connected to: Signal 100% |
|
| VCCpin 6 | Connected to: Signal 92% |
|
| BOOTpin 7 | Connected to: Signal 100% |
|
| SWpin 8 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Exp control board by Coen-Lab, PS-MotorControllerInterfacePCB by lhr-solar, ClearBell Ausseneinheit by akoerner-dev and ODMeter by LeonAbelmann.
The LMR33630ADDA in open source designs
The gallery holds 16 open source boards using the LMR33630ADDA from 14 GitHub repositories; a typical one measures about 77 × 93 mm and carries around 83 components.
53% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is Exp control board by Coen-Lab.
Parts used alongside the LMR33630ADDA
Microcontrollers on boards using the LMR33630ADDA
What boards using the LMR33630ADDA are built for
LMR33630ADDA: common questions
Where can I find a LMR33630ADDA reference design?
Each of the 16 boards on this page is a real design using the LMR33630ADDA. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the LMR33630ADDA VIN pin?
The VIN pin has a decoupling capacitor on 13 of 13 designs, most often 10 µF (then 220 nF). Counted from the KiCad layouts of 13 open source designs using the LMR33630ADDA.
How is the LMR33630ADDA BOOT pin connected?
The BOOT pin has a series capacitor on 13 of 13 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 13 open source designs using the LMR33630ADDA.
How is the LMR33630ADDA SW pin connected?
The SW pin has a series capacitor on 13 of 13 designs, most often 100 nF (then 220 nF). Counted from the KiCad layouts of 13 open source designs using the LMR33630ADDA.
What parts are used alongside the LMR33630ADDA?
The ADS1115, 74LVC125, ADM7150, BSC010N04LSI and DRV8353S appear in the most repositories here.
Which microcontrollers do boards using the LMR33630ADDA use?
Most are built on ESP32 (4), STM32 (3) and AVR/Arduino (2).
How big is a typical board using the LMR33630ADDA?
The median is 77 × 93 mm, and 53% are two-layer designs.
What is the most popular open source board using the LMR33630ADDA?
By GitHub stars, Exp control board by Coen-Lab, with 3 stars.
Can I simulate one of these boards using the LMR33630ADDA before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.