7 open source boards using the Opamp_Quad_Generic

Real designs built with the Opamp_Quad_Generic, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the Opamp_Quad_Generic

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the Opamp_Quad_Generic connects to, and the resistors, capacitors and other passives placed on it.

  • Pin 1 has a series resistor on 5 of 5 designs, most often 33 kΩ (then 1.8 kΩ).
  • The - pins have a series resistor on 5 of 5 designs, most often 3.3 kΩ (then 33 kΩ).
  • Pin 7 has a series resistor on 5 of 5 designs, most often 33 kΩ (then 1.8 kΩ).
  • The + pins have a series resistor on 4 of 5 designs, most often 3.3 kΩ (then 33 kΩ).
Pin 1Connected to: ADS1115 40%, a connector 40%
  • Series resistor on 100% · 33 kΩ (2), 1.8 kΩ (1), 10 kΩ (1)
-pin 2, 6, 9, 13Connected to: A connector 20% · not connected 20%
  • Series resistor on 100% · 3.3 kΩ (6), 33 kΩ (6), 1.8 kΩ (4)
+pin 3, 5, 10, 12Connected to: LM4120IM5-2.0/NOPB 20%, Opamp_Quad_Generic 20%, the microcontroller 20% · GND 15%
  • Series resistor on 80% · 3.3 kΩ (6), 33 kΩ (6), 10 kΩ (1)
V+pin 4Connected to: 3.3V 100%
  • Decoupling capacitor on 60%
Pin 7Connected to: ADS1115 40%, a connector 40%
  • Series resistor on 100% · 33 kΩ (2), 1.8 kΩ (1), 10 kΩ (1)
  • Series capacitor on 40% · 1 nF (1)
Pin 8Connected to: Signal 60% · not connected 40%
  • Series resistor on 60% · 1.8 kΩ (1), 10 kΩ (1), 1 kΩ (1)
  • Series capacitor on 40% · 1 nF (1)
V-pin 11Connected to: GND 80% · a signal 20%
Pin 14Connected to: ADS1115 40%, a connector 40% · not connected 40%
  • Series resistor on 60% · 33 kΩ (2), 1.8 kΩ (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include ADC Board by jkominek, ODMeter by LeonAbelmann, Svf by padenot and ODMeter by CameronBrooks11.

The Opamp_Quad_Generic in open source designs

The gallery holds 7 open source boards using the Opamp_Quad_Generic from 5 GitHub repositories; a typical one measures about 77 × 93 mm and carries around 83 components.

71% use four copper layers or more, and 57% carry an open source license.

The most starred is ADC Board by jkominek.

Parts used alongside the Opamp_Quad_Generic

Microcontrollers on boards using the Opamp_Quad_Generic

What boards using the Opamp_Quad_Generic are built for

Opamp_Quad_Generic: common questions

Where can I find a Opamp_Quad_Generic reference design?

Each of the 7 boards on this page is a real design using the Opamp_Quad_Generic. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the Opamp_Quad_Generic pin 1?

Pin 1 has a series resistor on 5 of 5 designs, most often 33 kΩ (then 1.8 kΩ). Counted from the KiCad layouts of 5 open source designs using the Opamp_Quad_Generic.

What resistor goes on the Opamp_Quad_Generic - pin?

The - pins have a series resistor on 5 of 5 designs, most often 3.3 kΩ (then 33 kΩ). Counted from the KiCad layouts of 5 open source designs using the Opamp_Quad_Generic.

What resistor goes on the Opamp_Quad_Generic pin 7?

Pin 7 has a series resistor on 5 of 5 designs, most often 33 kΩ (then 1.8 kΩ). Counted from the KiCad layouts of 5 open source designs using the Opamp_Quad_Generic.

What parts are used alongside the Opamp_Quad_Generic?

The 74LVC125, ADM7150, ADS1115, LMR33630ADDA and NodeMCU(ESP-32) appear in the most repositories here.

Which microcontrollers do boards using the Opamp_Quad_Generic use?

Most are built on STM32 (1).

How big is a typical board using the Opamp_Quad_Generic?

The median is 77 × 93 mm, and 29% are two-layer designs.

What is the most popular open source board using the Opamp_Quad_Generic?

By GitHub stars, ADC Board by jkominek, with 53 stars.

Can I simulate one of these boards using the Opamp_Quad_Generic before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part