7 open source boards using the NUP4202
Real designs built with the NUP4202, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Charge Controller
jharvey
139.7 × 88.9 mm157 parts2LNo license24Hc245t bypass esd panel
cyber-murmel
466 × 8 mm405 parts2LMIT22STM32
Multitool
cnlohr
68.6 × 95.3 mm84 parts2LNo license8EQMOD DIRECT Isolated
claudioarena
76.1 × 21.5 mm36 parts4LNo license3STM32
Low-Power-Inverter-STM32
rkleva
127.3 × 73 mm174 parts4LNo license0ESP32
Telem3
5aji
124 × 80 mm151 parts4LNo license0Hc245t bypass esd
cyber-murmel
10 × 10 mm5 parts2LMIT22
How designs wire the NUP4202
Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the NUP4202 connects to, and the resistors, capacitors and other passives placed on it.
- Pin 2 is tied to GND on 6 of 6 designs.
- Pin 5 has a decoupling capacitor on 4 of 6 designs, most often 22 nF (then 100 nF).
- Pin 5 is tied to 5.0V on 4 of 6 designs (a signal on 2).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: A connector 67%, the microcontroller 50% |
|
| Pin 2 | Connected to: GND 100% | — |
| Pin 3 | Connected to: A connector 67%, the microcontroller 33% |
|
| Pin 4 | Connected to: A connector 67%, the microcontroller 50% |
|
| Pin 5 | Connected to: 5.0V 67% · a signal 33% |
|
| Pin 6 | Connected to: A connector 67%, the microcontroller 50% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Charge Controller by jharvey, Hc245t bypass esd by cyber-murmel, Multitool by cnlohr and EQMOD DIRECT Isolated by claudioarena.
The NUP4202 in open source designs
The gallery holds 7 open source boards using the NUP4202 from 6 GitHub repositories; a typical one measures about 124 × 73 mm and carries around 151 components.
57% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Charge Controller by jharvey.
What boards using the NUP4202 are built for
NUP4202: common questions
Where can I find a NUP4202 reference design?
Each of the 7 boards on this page is a real design using the NUP4202. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the NUP4202 pin 2 connected?
Pin 2 is tied to GND on 6 of 6 designs. Counted from the KiCad layouts of 6 open source designs using the NUP4202.
What decoupling capacitors do designs use on the NUP4202 pin 5?
Pin 5 has a decoupling capacitor on 4 of 6 designs, most often 22 nF (then 100 nF). Counted from the KiCad layouts of 6 open source designs using the NUP4202.
Which microcontrollers do boards using the NUP4202 use?
Most are built on ESP32 (2) and STM32 (2).
How big is a typical board using the NUP4202?
The median is 124 × 73 mm, and 57% are two-layer designs.
What is the most popular open source board using the NUP4202?
By GitHub stars, Charge Controller by jharvey, with 24 stars.
Can I simulate one of these boards using the NUP4202 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.