7 open source boards using the Opamp_Quad

Real designs built with the Opamp_Quad, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

7 boardsClear filters|Most starred

How designs wire the Opamp_Quad

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the Opamp_Quad connects to, and the resistors, capacitors and other passives placed on it.

  • The - pins have a series resistor on 5 of 7 designs, most often 10 kΩ (then 3.3 kΩ).
  • Pin 7 has a series resistor on 5 of 7 designs, most often 0 Ω (then 3.3 kΩ).
  • Pin 7 has a series capacitor on 4 of 7 designs, most often 100 pF (then 1 µF).
  • Pin 8 has a series resistor on 4 of 7 designs, most often 10 kΩ (then 1 kΩ).
Pin 1Connected to: A connector 43%
  • Series resistor on 43% · 3.3 kΩ (1), 33 kΩ (1), 2.87 kΩ (1)
-pin 2, 6, 9, 13Connected to: Signal 82%
  • Series resistor on 71% · 10 kΩ (8), 3.3 kΩ (4), 33 kΩ (4)
  • Series capacitor on 43% · 10 nF (4), 100 pF (1), 100 nF (1)
+pin 3, 5, 10, 12Connected to: A connector 29% · VREF 25%
  • Series resistor on 43% · 39 kΩ (4), 0 Ω (1), 10 kΩ (1)
  • Resistor to GND on 43% · 33 kΩ (4), 24 kΩ (1)
V+pin 4Connected to: 12V 71% · a signal 29%
Pin 7Connected to: A connector 43%
  • Series resistor on 71% · 0 Ω (2), 3.3 kΩ (1), 33 kΩ (1)
  • Series capacitor on 57% · 100 pF (1), 1 µF (1), 10 nF (1)
Pin 8Connected to: A connector 43%
  • Series resistor on 57% · 10 kΩ (3), 1 kΩ (2), 100 Ω (1)
Pin 14Connected to: A connector 71%, the microcontroller 29%
  • Series resistor on 57% · 100 Ω (1), 10 kΩ (1), 33 kΩ (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Ouroboros by echamman, ECE USB Multi-Function Lab Instrument by bradencamp, Simple OpAmp by mwwhited and EMK310 by Boilingtub.

The Opamp_Quad in open source designs

The gallery holds 7 open source boards using the Opamp_Quad from 7 GitHub repositories; a typical one measures about 124.7 × 100 mm and carries around 76 components.

57% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is Ouroboros by echamman.

Parts used alongside the Opamp_Quad

Microcontrollers on boards using the Opamp_Quad

What boards using the Opamp_Quad are built for

Opamp_Quad: common questions

Where can I find a Opamp_Quad reference design?

Each of the 7 boards on this page is a real design using the Opamp_Quad. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the Opamp_Quad - pin?

The - pins have a series resistor on 5 of 7 designs, most often 10 kΩ (then 3.3 kΩ). Counted from the KiCad layouts of 7 open source designs using the Opamp_Quad.

What resistor goes on the Opamp_Quad pin 7?

Pin 7 has a series resistor on 5 of 7 designs, most often 0 Ω (then 3.3 kΩ). Counted from the KiCad layouts of 7 open source designs using the Opamp_Quad.

What resistor goes on the Opamp_Quad pin 8?

Pin 8 has a series resistor on 4 of 7 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 7 open source designs using the Opamp_Quad.

Which microcontrollers do boards using the Opamp_Quad use?

Most are built on PIC (1) and STM32 (1).

How big is a typical board using the Opamp_Quad?

The median is 124.7 × 100 mm, and 57% are two-layer designs.

What is the most popular open source board using the Opamp_Quad?

By GitHub stars, Ouroboros by echamman, with 2 stars.

Can I simulate one of these boards using the Opamp_Quad before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part