5 open source boards using the PAC1720-1-AIA-TR
Real designs built with the PAC1720-1-AIA-TR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PDNode Baseboard
DvidMakesThings
203 × 151.8 mm208 parts6LAGPL-3.086STM32
Pecanpico9
DL7AD
29.8 × 33.7 mm112 parts2LGPL-3.068STM32
Pecanpico10
DL7AD
23 × 50 mm119 parts2LCustom license41STM32
BMS
embeddedalpha
100 × 48 mm185 parts2LNo license6WPT-01-TRANSMITTER
SasataniLab
70 × 85 mm185 parts4LAGPL-3.00
The PAC1720-1-AIA-TR in open source designs
The gallery holds 5 open source boards using the PAC1720-1-AIA-TR from 5 GitHub repositories; a typical one measures about 70 × 50 mm and carries around 185 components.
60% are two-layer designs, the rest use four layers or more, and 60% carry an open source license.
The most starred is PDNode Baseboard by DvidMakesThings.
Parts used alongside the PAC1720-1-AIA-TR
Microcontrollers on boards using the PAC1720-1-AIA-TR
What boards using the PAC1720-1-AIA-TR are built for
PAC1720-1-AIA-TR: common questions
Where can I find a PAC1720-1-AIA-TR reference design?
Each of the 5 boards on this page is a real design using the PAC1720-1-AIA-TR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the PAC1720-1-AIA-TR?
The ADP322ACPZ-115-R7, BME280, SPV1040T and TPS62260DRVR appear in the most repositories here.
Which microcontrollers do boards using the PAC1720-1-AIA-TR use?
Most are built on STM32 (3).
How big is a typical board using the PAC1720-1-AIA-TR?
The median is 70 × 50 mm, and 60% are two-layer designs.
What is the most popular open source board using the PAC1720-1-AIA-TR?
By GitHub stars, PDNode Baseboard by DvidMakesThings, with 86 stars.
Can I simulate one of these boards using the PAC1720-1-AIA-TR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.