3 open source boards using the PCF2129AT

Real designs built with the PCF2129AT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The PCF2129AT in open source designs

The gallery holds 3 open source boards using the PCF2129AT from 3 GitHub repositories; a typical one measures about 95 × 72 mm and carries around 80 components.

100% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.

The most starred is Numitron-Clock by 74hc595.

Microcontrollers on boards using the PCF2129AT

PCF2129AT: common questions

Where can I find a PCF2129AT reference design?

Each of the 3 boards on this page is a real design using the PCF2129AT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

Which microcontrollers do boards using the PCF2129AT use?

Most are built on ESP32 (1), FPGA (1) and NXP (1).

How big is a typical board using the PCF2129AT?

The median is 95 × 72 mm, and 100% are two-layer designs.

What is the most popular open source board using the PCF2129AT?

By GitHub stars, Numitron-Clock by 74hc595, with 6 stars.

Can I simulate one of these boards using the PCF2129AT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part