3 open source boards using the PCM1821QRTERQ1

Real designs built with the PCM1821QRTERQ1, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The PCM1821QRTERQ1 in open source designs

The gallery holds 3 open source boards using the PCM1821QRTERQ1 from 3 GitHub repositories; a typical one measures about 100 × 175 mm and carries around 436 components.

100% use four copper layers or more, and 33% carry an open source license.

The most starred is Spartacus PCB REV1 by vpcsln.

Microcontrollers on boards using the PCM1821QRTERQ1

What boards using the PCM1821QRTERQ1 are built for

PCM1821QRTERQ1: common questions

Where can I find a PCM1821QRTERQ1 reference design?

Each of the 3 boards on this page is a real design using the PCM1821QRTERQ1. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the PCM1821QRTERQ1?

The 161N-4BVS11, DSC1003DL2-008.0000T, LM1084IT-5.0G, MC74ACT541DTR2G and NE5532 appear in the most repositories here.

Which microcontrollers do boards using the PCM1821QRTERQ1 use?

Most are built on STM32 (3).

How big is a typical board using the PCM1821QRTERQ1?

The median is 100 × 175 mm, and 0% are two-layer designs.

What is the most popular open source board using the PCM1821QRTERQ1?

By GitHub stars, Spartacus PCB REV1 by vpcsln, with 1 stars.

Can I simulate one of these boards using the PCM1821QRTERQ1 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part