3 open source boards using the PG02S4803A

Real designs built with the PG02S4803A, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

3 boardsClear filters|Most starred

The PG02S4803A in open source designs

The gallery holds 3 open source boards using the PG02S4803A from 3 GitHub repositories; a typical one measures about 80 × 50 mm and carries around 48 components.

100% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.

The most starred is FanController by newAM.

Parts used alongside the PG02S4803A

Microcontrollers on boards using the PG02S4803A

What boards using the PG02S4803A are built for

PG02S4803A: common questions

Where can I find a PG02S4803A reference design?

Each of the 3 boards on this page is a real design using the PG02S4803A. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the PG02S4803A?

The NCP1090, 25AA02E48T-I_OT and W5500 appear in the most repositories here.

Which microcontrollers do boards using the PG02S4803A use?

Most are built on AVR/Arduino (1) and STM32 (1).

How big is a typical board using the PG02S4803A?

The median is 80 × 50 mm, and 100% are two-layer designs.

What is the most popular open source board using the PG02S4803A?

By GitHub stars, FanController by newAM, with 12 stars.

Can I simulate one of these boards using the PG02S4803A before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part