6 open source boards using the Pico W

Real designs built with the Pico W, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

The Pico W in open source designs

The gallery holds 6 open source boards using the Pico W from 5 GitHub repositories; a typical one measures about 88.9 × 100 mm and carries around 69 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is ZuluSCSI-Pico-OSHW by ZuluSCSI.

Microcontrollers on boards using the Pico W

What boards using the Pico W are built for

Pico W: common questions

Where can I find a Pico W reference design?

Each of the 6 boards on this page is a real design using the Pico W. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the Pico W?

The 74LVT245BBT20-13, 74LVTH125MTC and LM3674MFX-ADJ/NOPB appear in the most repositories here.

Which microcontrollers do boards using the Pico W use?

Most are built on RP2040/RP2350 (6).

How big is a typical board using the Pico W?

The median is 88.9 × 100 mm, and 100% are two-layer designs.

What is the most popular open source board using the Pico W?

By GitHub stars, ZuluSCSI-Pico-OSHW by ZuluSCSI, with 38 stars.

Can I simulate one of these boards using the Pico W before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part