17 open source boards using the ProMicro-kbd
Real designs built with the ProMicro-kbd, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Sweepbling lp
davidphilipbarr
216.9 × 86.9 mm46 parts2LSHL-2.12.1kSource pad
onnenon
68 × 68 mm19 parts2LCC0-1.01Datum
hermatician
109 × 86.9 mm19 parts2LNo license0Sweep high
davidphilipbarr
229.5 × 95.2 mm42 parts2LSHL-2.12.1kChocorne36-n!n
davidphilipbarr
112 × 87.7 mm23 parts2LNo license67Sweep mid
davidphilipbarr
229.5 × 95.2 mm45 parts2LNo license10BrettLe
Tschibo00
135.7 × 110.5 mm21 parts2LMIT0Sweepv2
davidphilipbarr
216.9 × 86.9 mm40 parts2LSHL-2.12.1kSweepv2.1
davidphilipbarr
216.9 × 86.9 mm44 parts2LNo license10Sweep bling mx
davidphilipbarr
113.5 × 95.2 mm22 parts2LSHL-2.12.1kKeyball61 Left
idank
143 × 113.5 mm125 parts2LCC-BY-SA-4.010Half swept
davidphilipbarr
109 × 86.9 mm20 parts2LSHL-2.12.1kChocorne36-n!n
davidphilipbarr
112.9 × 97.1 mm26 parts2LNo license10Demeter
davidphilipbarr
116.2 × 107.4 mm22 parts2LNo license10Hawk moth
davidphilipbarr
98.4 × 83 mm21 parts2LNo license10Hypergolic
davidphilipbarr
118.8 × 92.6 mm21 parts2LNo license10Flip
davidphilipbarr
97.6 × 83 mm20 parts2LNo license10
How designs wire the ProMicro-kbd
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the ProMicro-kbd connects to, and the resistors, capacitors and other passives placed on it.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 4, 23 | Connected to: GND 86% | — |
| VCCpin 21 | Connected to: VCC 86% | — |
20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Half swept by davidphilipbarr, Chocorne36-n!n by davidphilipbarr, Chocorne36-n!n by davidphilipbarr and Keyball61 Left by idank.
The ProMicro-kbd in open source designs
The gallery holds 17 open source boards using the ProMicro-kbd from 7 GitHub repositories; a typical one measures about 116.2 × 87.7 mm and carries around 22 components.
100% are two-layer designs, the rest use four layers or more, and 18% carry an open source license.
The most starred is Sweepbling lp pcb by davidphilipbarr.
What boards using the ProMicro-kbd are built for
ProMicro-kbd: common questions
Where can I find a ProMicro-kbd reference design?
Each of the 17 boards on this page is a real design using the ProMicro-kbd. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How big is a typical board using the ProMicro-kbd?
The median is 116.2 × 87.7 mm, and 100% are two-layer designs.
What is the most popular open source board using the ProMicro-kbd?
By GitHub stars, Sweepbling lp pcb by davidphilipbarr, with 2,118 stars.
Can I simulate one of these boards using the ProMicro-kbd before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.