6 open source boards using the TXB0108DQSR
Real designs built with the TXB0108DQSR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGAM68k
annoyatron255
100 × 100 mm105 parts2LNo license24
TXB0108
upsidedownlabs
13.7 × 26.4 mm6 parts2LMIT11
STM32Node base
LanternD
78 × 40 mm73 parts2LApache-2.06
AVR/ArduinoControl panel
lucanastasio
65 × 58 mm158 parts2LNo license1
ADC-A-v1
macaba
35.5 × 35.5 mm26 parts6LMIT94
PICFOXSI-4 Formatter/Plenum board
foxsi
116.8 × 59.7 mm133 parts4LNo license1
The TXB0108DQSR in open source designs
The gallery holds 6 open source boards using the TXB0108DQSR from 6 GitHub repositories; a typical one measures about 71.5 × 49 mm and carries around 89 components.
67% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.
The most starred is ADC-A-v1 by macaba.
Microcontrollers on boards using the TXB0108DQSR
What boards using the TXB0108DQSR are built for
TXB0108DQSR: common questions
Where can I find a TXB0108DQSR reference design?
Each of the 6 boards on this page is a real design using the TXB0108DQSR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the TXB0108DQSR use?
Most are built on AVR/Arduino (1), FPGA (1), PIC (1) and STM32 (1).
How big is a typical board using the TXB0108DQSR?
The median is 71.5 × 49 mm, and 67% are two-layer designs.
What is the most popular open source board using the TXB0108DQSR?
By GitHub stars, ADC-A-v1 by macaba, with 94 stars.
Can I simulate one of these boards using the TXB0108DQSR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.