5 open source boards using the RFFM6403SB
Real designs built with the RFFM6403SB, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Openlst hw
OpenLST
60 × 50 mm86 parts4LNo license37OpenLST
diegosvs
60 × 50 mm86 parts4LNo license2HarvardSatelliteGroundstation
AlexFWulff
60 × 50 mm86 parts4LNo license1OPENLST-Hardware
elfenix7
60 × 50 mm86 parts4LNo license0Open lst hw clone
jonnylin22
60 × 50 mm86 parts4LNo license0
How designs wire the RFFM6403SB
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RFFM6403SB connects to, and the resistors, capacitors and other passives placed on it.
- Pin 2 has a resistor to GND on 5 of 5 designs, most often 1 kΩ.
- Pin 2 has a series resistor on 5 of 5 designs, most often 100 Ω.
- Pin 3 has a pull-up to 3.3V on 5 of 5 designs, most often 1 kΩ.
- Pin 4 has a resistor to GND on 5 of 5 designs, most often 1 kΩ.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Pin 1 | Connected to: GND 100% | — |
| Pin 2 | Connected to: CC1110F32RHHR 100% |
|
| Pin 3 | Connected to: CC1110F32RHHR 100% |
|
| Pin 4 | Connected to: CC1110F32RHHR 100% |
|
| Pin 5 | Connected to: Signal 100% |
|
| Pin 6 | Connected to: GND 100% | — |
| Pin 7 | Connected to: Signal 100% |
|
| Pin 8 | Connected to: GND 100% | — |
| Pin 9 | Connected to: GND 100% | — |
| Pin 11 | Connected to: GND 100% | — |
| Pin 12 | Connected to: GND 100% | — |
| Pin 14 | Connected to: Not connected 100% | — |
| Pin 15 | Connected to: GND 100% | — |
| Pin 16 | Connected to: Not connected 100% | — |
| Pin 17 | Connected to: 3.6V 100% |
|
| Pin 18 | Connected to: Signal 100% |
|
| Pin 19 | Connected to: GND 100% | — |
| Pin 20 | Connected to: Signal 100% |
|
| Pin 21 | Connected to: GND 100% | — |
| Pin 22 | Connected to: GND 100% | — |
| Pin 23 | Connected to: 3.3V 100% |
|
| Pin 24 | Connected to: 3.6V 100% |
|
| Pin 25 | Connected to: Not connected 100% | — |
| Pin 26 | Connected to: 3.6V 100% |
|
| Pin 27 | Connected to: GND 100% | — |
| Pin 28 | Connected to: GND 100% | — |
| Pin 29 | Connected to: GND 100% | — |
2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Openlst hw by OpenLST, OpenLST by diegosvs, HarvardSatelliteGroundstation by AlexFWulff and OPENLST-Hardware by elfenix7.
The RFFM6403SB in open source designs
The gallery holds 5 open source boards using the RFFM6403SB from 5 GitHub repositories; a typical one measures about 60 × 50 mm and carries around 86 components.
100% use four copper layers or more, and 0% carry an open source license.
The most starred is Openlst hw by OpenLST.
Parts used alongside the RFFM6403SB
What boards using the RFFM6403SB are built for
RFFM6403SB: common questions
Where can I find a RFFM6403SB reference design?
Each of the 5 boards on this page is a real design using the RFFM6403SB. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What resistor goes on the RFFM6403SB pin 2?
Pin 2 has a resistor to GND on 5 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the RFFM6403SB.
What pull-up resistor is used on the RFFM6403SB pin 3?
Pin 3 has a pull-up to 3.3V on 5 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the RFFM6403SB.
What resistor goes on the RFFM6403SB pin 4?
Pin 4 has a resistor to GND on 5 of 5 designs, most often 1 kΩ. Counted from the KiCad layouts of 5 open source designs using the RFFM6403SB.
What parts are used alongside the RFFM6403SB?
The CC1110F32RHHR, FT5HNBPK27.0-T1, LM1117IMP-3.3/NOPB, LT1086-3.6 and TLV803SDBZR appear in the most repositories here.
How big is a typical board using the RFFM6403SB?
The median is 60 × 50 mm, and 0% are two-layer designs.
What is the most popular open source board using the RFFM6403SB?
By GitHub stars, Openlst hw by OpenLST, with 37 stars.
Can I simulate one of these boards using the RFFM6403SB before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.