13 open source boards using the 4259-63
Real designs built with the 4259-63, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Openlst hw
OpenLST
60 × 50 mm86 parts4LNo license37RP2040/RP2350
MokyaLora
tengigabytes
66 × 105 mm328 parts6LCustom license7RP2040/RP2350
VikramSat-RF-subsystem
Astralis1409
72 × 72 mm89 parts4LMIT2OpenLST
diegosvs
60 × 50 mm86 parts4LNo license2Ai1 CC1000
FreemanLima
47.8 × 39.5 mm58 parts4LNo license2PIC
Amp board
Alex-Wolfe
223.5 × 147.3 mm674 parts4LNo license1RP2040/RP2350
VikramSat-RF-subsystem
Keyaan-07
72 × 72 mm89 parts4LMIT0Open lst hw clone
jonnylin22
60 × 50 mm86 parts4LNo license0OPENLST-Hardware
elfenix7
60 × 50 mm86 parts4LNo license0STM32
Rigel b hw
Longhorn-Rocketry-Electronics
233.5 × 45.5 mm56 parts4LNo license0ESP32
DH-LRC-0
lnvke
46 × 40 mm55 parts4LNo license0CC1101 Multx
FreemanLima
35.4 × 26.1 mm35 parts4LNo license2- schematic only · 81 parts
Commodore 7.67
parsa-novin
81 parts2LNo license2
How designs wire the 4259-63
Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the 4259-63 connects to, and the resistors, capacitors and other passives placed on it.
- The RFC pin has a series capacitor on 11 of 11 designs, most often 220 pF (then 39 pF).
- The RF2 pin has a series capacitor on 8 of 11 designs, most often 220 pF (then 2.4 pF).
- The RF1 pin has a series capacitor on 7 of 11 designs, most often 220 pF (then 2.2 pF).
- The CTRL_OR_VDD pin has a capacitor to GND on 7 of 11 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| RF1pin 1 | Connected to: Signal 91% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| RF2pin 3 | Connected to: Signal 100% |
|
| CTRLpin 4 | Connected to: CC1110F32RHHR 36% |
|
| RFCpin 5 | Connected to: Signal 91% |
|
| CTRL_OR_VDDpin 6 | Connected to: 3.3V 45% · a signal 45% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Openlst hw by OpenLST, MokyaLora by tengigabytes, VikramSat-RF-subsystem by Astralis1409 and OpenLST by diegosvs.
The 4259-63 in open source designs
The gallery holds 13 open source boards using the 4259-63 from 12 GitHub repositories; a typical one measures about 60 × 50 mm and carries around 86 components.
92% use four copper layers or more, and 15% carry an open source license.
The most starred is Openlst hw by OpenLST.
Parts used alongside the 4259-63
Microcontrollers on boards using the 4259-63
What boards using the 4259-63 are built for
4259-63: common questions
Where can I find a 4259-63 reference design?
Each of the 13 boards on this page is a real design using the 4259-63. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the 4259-63 RFC pin connected?
The RFC pin has a series capacitor on 11 of 11 designs, most often 220 pF (then 39 pF). Counted from the KiCad layouts of 11 open source designs using the 4259-63.
How is the 4259-63 RF2 pin connected?
The RF2 pin has a series capacitor on 8 of 11 designs, most often 220 pF (then 2.4 pF). Counted from the KiCad layouts of 11 open source designs using the 4259-63.
How is the 4259-63 RF1 pin connected?
The RF1 pin has a series capacitor on 7 of 11 designs, most often 220 pF (then 2.2 pF). Counted from the KiCad layouts of 11 open source designs using the 4259-63.
What parts are used alongside the 4259-63?
The CC1110F32RHHR, FT5HNBPK27.0-T1, LM1117IMP-3.3/NOPB, LT1086-3.6 and RFFM6403SB appear in the most repositories here.
Which microcontrollers do boards using the 4259-63 use?
Most are built on RP2040/RP2350 (3), ESP32 (1), PIC (1) and STM32 (1).
How big is a typical board using the 4259-63?
The median is 60 × 50 mm, and 8% are two-layer designs.
What is the most popular open source board using the 4259-63?
By GitHub stars, Openlst hw by OpenLST, with 37 stars.
Can I simulate one of these boards using the 4259-63 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.