8 open source boards using the RP2040_Stamp

Real designs built with the RP2040_Stamp, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the RP2040_Stamp

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the RP2040_Stamp connects to, and the resistors, capacitors and other passives placed on it.

  • The 5V pin is tied to 5V on 5 of 5 designs.
  • The 3.3V pin is tied to 3.3V on 5 of 5 designs.
  • The GPIO20 pin is left unconnected on 4 of 5 designs.
  • The GPIO21 pin is left unconnected on 4 of 5 designs.
GPIO1pin 2Connected to: Not connected 60% · a signal 40%
GPIO2pin 3Connected to: Not connected 60% · a signal 40%
GPIO3pin 4Connected to: Not connected 60% · a signal 40%
GPIO7pin 8Connected to: Not connected 60% · a signal 40%
GPIO8pin 9Connected to: Not connected 60% · a signal 40%
GPIO11pin 12Connected to: Not connected 60% · a signal 40%
GPIO20pin 21Connected to: Not connected 80% · a signal 20%
GPIO21pin 22Connected to: Not connected 80% · a signal 20%
GPIO22pin 23Connected to: Not connected 60% · a signal 40%
GPIO23pin 24Connected to: Not connected 80% · a signal 20%
GPIO24pin 25Connected to: Not connected 60% · a signal 40%
GPIO25pin 26Connected to: Not connected 60% · a signal 40%
GPIO26pin 27Connected to: Not connected 60% · a signal 40%
GNDpin 31Connected to: GND 100%
VBATpin 32Connected to: Not connected 80% · VBAT 20%
5Vpin 33Connected to: 5V 100%
3.3Vpin 34Connected to: 3.3V 100%
SWDIOpin 37Connected to: Not connected 60% · a signal 40%
SWCLKpin 38Connected to: Not connected 60% · a signal 40%
RESETpin 39Connected to: Signal 60% · not connected 40%
  • Pull-up to 3.3V on 40% · 10 kΩ (2)

20 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Decoder by Bread80, A500-USB-Keyboard-Adapter-RP2040 by wiretap-retro, A2000-USB-Keyboard-Adapter-RP2040 by wiretap-retro and Quanta75 Pico by obsilab.

The RP2040_Stamp in open source designs

The gallery holds 8 open source boards using the RP2040_Stamp from 5 GitHub repositories; a typical one measures about 317.5 × 158 mm and carries around 215 components.

100% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is Decoder by Bread80.

Parts used alongside the RP2040_Stamp

Microcontrollers on boards using the RP2040_Stamp

What boards using the RP2040_Stamp are built for

RP2040_Stamp: common questions

Where can I find a RP2040_Stamp reference design?

Each of the 8 boards on this page is a real design using the RP2040_Stamp. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the RP2040_Stamp 5V pin connected?

The 5V pin is tied to 5V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RP2040_Stamp.

How is the RP2040_Stamp 3.3V pin connected?

The 3.3V pin is tied to 3.3V on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RP2040_Stamp.

How is the RP2040_Stamp GPIO20 pin connected?

The GPIO20 pin is left unconnected on 4 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the RP2040_Stamp.

Which microcontrollers do boards using the RP2040_Stamp use?

Most are built on RP2040/RP2350 (8).

How big is a typical board using the RP2040_Stamp?

The median is 317.5 × 158 mm, and 100% are two-layer designs.

What is the most popular open source board using the RP2040_Stamp?

By GitHub stars, Decoder by Bread80, with 19 stars.

Can I simulate one of these boards using the RP2040_Stamp before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part