3 open source boards using the RT9013-12
Real designs built with the RT9013-12, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Gelatino board
bru4bas
69 × 53.8 mm69 parts2LGPL-2.08ESP32
BREAN
uawortu
82 × 35 mm85 parts4LNo license2Raspberry Pi
CM5-AI-Cam-CopperPilot
CopperPilot
55 × 40 mm90 parts6LCERN-OHL-S-2.00
The RT9013-12 in open source designs
The gallery holds 3 open source boards using the RT9013-12 from 3 GitHub repositories; a typical one measures about 69 × 40 mm and carries around 85 components.
67% use four copper layers or more, and 67% carry an open source license.
The most starred is Gelatino board by bru4bas.
Microcontrollers on boards using the RT9013-12
What boards using the RT9013-12 are built for
RT9013-12: common questions
Where can I find a RT9013-12 reference design?
Each of the 3 boards on this page is a real design using the RT9013-12. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the RT9013-12 use?
Most are built on AVR/Arduino (1), ESP32 (1) and Raspberry Pi (1).
How big is a typical board using the RT9013-12?
The median is 69 × 40 mm, and 33% are two-layer designs.
What is the most popular open source board using the RT9013-12?
By GitHub stars, Gelatino board by bru4bas, with 8 stars.
Can I simulate one of these boards using the RT9013-12 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.