4 open source boards using the RTL8201FI-VC-CG
Real designs built with the RTL8201FI-VC-CG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Iot esp eth ind
wayri
29.5 × 64.5 mm146 parts4LCustom license1Agriculture-VCU v2
laurapreidewe
176.5 × 184.2 mm210 parts4LNo license0Ethnode
cr1tbit
74 × 37 mm73 parts2LNo license0ESP32
Iot esp eth ind
uysan
29.5 × 64.5 mm146 parts4LCERN-OHL-P-2.019
The RTL8201FI-VC-CG in open source designs
The gallery holds 4 open source boards using the RTL8201FI-VC-CG from 4 GitHub repositories; a typical one measures about 51.7 × 64.5 mm and carries around 146 components.
75% use four copper layers or more, and 25% carry an open source license.
The most starred is Iot esp eth ind by uysan.
Parts used alongside the RTL8201FI-VC-CG
Microcontrollers on boards using the RTL8201FI-VC-CG
What boards using the RTL8201FI-VC-CG are built for
RTL8201FI-VC-CG: common questions
Where can I find a RTL8201FI-VC-CG reference design?
Each of the 4 boards on this page is a real design using the RTL8201FI-VC-CG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the RTL8201FI-VC-CG?
The APX811-29UG-7, AZ1117IH-3.3TRG1, CH340G, ESP32-D0WD-V3 and SN74AHC1G08DBVR appear in the most repositories here.
Which microcontrollers do boards using the RTL8201FI-VC-CG use?
Most are built on ESP32 (2).
How big is a typical board using the RTL8201FI-VC-CG?
The median is 51.7 × 64.5 mm, and 25% are two-layer designs.
What is the most popular open source board using the RTL8201FI-VC-CG?
By GitHub stars, Iot esp eth ind by uysan, with 19 stars.
Can I simulate one of these boards using the RTL8201FI-VC-CG before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.