6 open source boards using the SN74AHC1G08DBVR
Real designs built with the SN74AHC1G08DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
RP2040/RP2350
SWD2USBC Sample Target
alvarop
51.8 × 20 mm47 parts4LCC0-1.029ESP32
Iot esp eth com
uysan
29.5 × 64.5 mm146 parts4LCERN-OHL-P-2.019STM32
SmallDSP Maxi
Gemuesesaft
120 × 120 mm511 parts4LGPL-3.01ESP32
Iot esp eth ind
wayri
29.5 × 64.5 mm146 parts4LCustom license1Ito controller
luciddreams
160 × 110 mm202 parts4LNo license0ESP32
Iot esp eth ind
uysan
29.5 × 64.5 mm146 parts4LCERN-OHL-P-2.019
How designs wire the SN74AHC1G08DBVR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74AHC1G08DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 47 µF).
- The A pin has a pull-up to 3.3V on 3 of 5 designs, most often 47 kΩ (then 100 kΩ).
- The Y pin has a series resistor on 2 of 5 designs, most often 5.1 kΩ (then 2.2 kΩ).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| Apin 1 | Connected to: A connector 80% |
|
| GNDpin 3 | Connected to: GND 100% | — |
| Ypin 4 | Connected to: The microcontroller 40% |
|
| VCCpin 5 | Connected to: 3.3V 100% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SWD2USBC Sample Target by alvarop, Iot esp eth com by uysan, SmallDSP Maxi by Gemuesesaft and Iot esp eth ind by wayri.
The SN74AHC1G08DBVR in open source designs
The gallery holds 6 open source boards using the SN74AHC1G08DBVR from 5 GitHub repositories; a typical one measures about 40.6 × 64.5 mm and carries around 146 components.
100% use four copper layers or more, and 67% carry an open source license.
The most starred is SWD2USBC Sample Target by alvarop.
Parts used alongside the SN74AHC1G08DBVR
Microcontrollers on boards using the SN74AHC1G08DBVR
What boards using the SN74AHC1G08DBVR are built for
SN74AHC1G08DBVR: common questions
Where can I find a SN74AHC1G08DBVR reference design?
Each of the 6 boards on this page is a real design using the SN74AHC1G08DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74AHC1G08DBVR VCC pin?
The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 47 µF). Counted from the KiCad layouts of 5 open source designs using the SN74AHC1G08DBVR.
What pull-up resistor is used on the SN74AHC1G08DBVR A pin?
The A pin has a pull-up to 3.3V on 3 of 5 designs, most often 47 kΩ (then 100 kΩ). Counted from the KiCad layouts of 5 open source designs using the SN74AHC1G08DBVR.
What resistor goes on the SN74AHC1G08DBVR Y pin?
The Y pin has a series resistor on 2 of 5 designs, most often 5.1 kΩ (then 2.2 kΩ). Counted from the KiCad layouts of 5 open source designs using the SN74AHC1G08DBVR.
What parts are used alongside the SN74AHC1G08DBVR?
The APX811-29UG-7, AZ1117IH-3.3TRG1, CH340G, ESP32-D0WD-V3 and RTL8201FI-VC-CG appear in the most repositories here.
Which microcontrollers do boards using the SN74AHC1G08DBVR use?
Most are built on ESP32 (3), RP2040/RP2350 (1) and STM32 (1).
How big is a typical board using the SN74AHC1G08DBVR?
The median is 40.6 × 64.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74AHC1G08DBVR?
By GitHub stars, SWD2USBC Sample Target by alvarop, with 29 stars.
Can I simulate one of these boards using the SN74AHC1G08DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.