8 open source boards using the Si4735-D60-GU

Real designs built with the Si4735-D60-GU, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

8 boardsClear filters|Most starred

How designs wire the Si4735-D60-GU

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the Si4735-D60-GU connects to, and the resistors, capacitors and other passives placed on it.

  • The FMI pin has a series capacitor on 5 of 6 designs, most often 18 pF (then 33 nF).
  • The AMI pin has a series capacitor on 5 of 6 designs, most often 470 nF (then 22 pF).
  • The VD pin has a series capacitor on 5 of 6 designs, most often 22 nF.
  • The VD pin has a capacitor to GND on 5 of 6 designs, most often 1 µF (then 47 nF).
DOUTpin 1Connected to: Not connected 67% · a signal 33%
DFSpin 2Connected to: Not connected 67% · a signal 33%
GPO3/[DCLK]pin 3Connected to: Signal 67% · not connected 33%
  • Capacitor to GND on 33% · 22 pF (2)
  • Crystal on 33% · 32.768 kHz (2)
  • Series resistor on 33% · 2.2 kΩ (1), 2 kΩ (1)
NCpin 6, 7, 10, 11Connected to: Not connected 79% · GND 21%
FMIpin 8Connected to: Signal 83% · not connected 17%
  • Series capacitor on 83% · 18 pF (2), 33 nF (1), 22 pF (1)
  • Inductor on 50% · 180 nH (2), 180 H (1)
RFGNDpin 9Connected to: GND 100%
AMIpin 12Connected to: Signal 83% · not connected 17%
  • Series capacitor on 83% · 470 nF (3), 22 pF (1)
GNDpin 13, 14Connected to: GND 100%
RSTpin 15Connected to: Signal 100%
  • Series resistor on 50% · 2 kΩ (2), 10 kΩ (1)
SENpin 16Connected to: Signal 67% · GND 33%
  • Series resistor on 33% · 2 kΩ (2)
SCLKpin 17Connected to: The microcontroller 33%
  • Pull-up to 3.3V on 67% · 4.7 kΩ (2), 2.2 kΩ (1), 2 kΩ (1)
  • Series resistor on 33% · 2 kΩ (1), 10 kΩ (1)
SDIOpin 18Connected to: The microcontroller 33%
  • Pull-up to 3.3V on 67% · 4.7 kΩ (2), 2.2 kΩ (1), 2 kΩ (1)
  • Series resistor on 33% · 2 kΩ (1), 10 kΩ (1)
RCLKpin 19Connected to: Signal 100%
  • Crystal on 67% · 32.768 kHz (3)
  • Capacitor to GND on 33% · 22 pF (2)
VDpin 20Connected to: 3.3V 50% · a signal 50%
  • Series capacitor on 83% · 22 nF (3)
  • Capacitor to GND on 83% · 1 µF (2), 47 nF (1), 10 µF (1)
VApin 21Connected to: 3.3V 50% · a signal 50%
  • Series capacitor on 83% · 22 nF (3)
  • Capacitor to GND on 83% · 1 µF (2), 47 nF (1), 10 µF (1)
DBYPpin 22Connected to: Signal 100%
  • Series capacitor on 50% · 22 nF (2)
  • Capacitor to the supply on 50% · 100 nF (1), 22 nF (1)
ROUT/[DOUT]pin 23Connected to: Signal 67% · not connected 33%
  • Series capacitor on 67% · 4.7 µF (1), 4 µF (1), 470 nF (1)
LOUT/[DFS]pin 24Connected to: Signal 83% · not connected 17%
  • Series capacitor on 83% · 4.7 µF (1), 4 µF (1), 470 nF (1)

2 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include MBRadio 4732 BO3 by LadyRoninEngineer, PocketFT8Xcvr by conr2286, Radio SI4735 v1.0 stable by EthicalEarth and Akash-Chowa-DX by Hasnat4763.

The Si4735-D60-GU in open source designs

The gallery holds 8 open source boards using the Si4735-D60-GU from 7 GitHub repositories; a typical one measures about 97 × 69.8 mm and carries around 55 components.

75% are two-layer designs, the rest use four layers or more, and 50% carry an open source license.

The most starred is MBRadioDual2 by LadyRoninEngineer.

Microcontrollers on boards using the Si4735-D60-GU

What boards using the Si4735-D60-GU are built for

Si4735-D60-GU: common questions

Where can I find a Si4735-D60-GU reference design?

Each of the 8 boards on this page is a real design using the Si4735-D60-GU. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the Si4735-D60-GU FMI pin connected?

The FMI pin has a series capacitor on 5 of 6 designs, most often 18 pF (then 33 nF). Counted from the KiCad layouts of 6 open source designs using the Si4735-D60-GU.

How is the Si4735-D60-GU AMI pin connected?

The AMI pin has a series capacitor on 5 of 6 designs, most often 470 nF (then 22 pF). Counted from the KiCad layouts of 6 open source designs using the Si4735-D60-GU.

How is the Si4735-D60-GU VD pin connected?

The VD pin has a series capacitor on 5 of 6 designs, most often 22 nF. Counted from the KiCad layouts of 6 open source designs using the Si4735-D60-GU.

Which microcontrollers do boards using the Si4735-D60-GU use?

Most are built on NXP (1), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the Si4735-D60-GU?

The median is 97 × 69.8 mm, and 75% are two-layer designs.

What is the most popular open source board using the Si4735-D60-GU?

By GitHub stars, MBRadioDual2 by LadyRoninEngineer, with 34 stars.

Can I simulate one of these boards using the Si4735-D60-GU before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part