13 open source boards using the SN74LV1T125DBV

Real designs built with the SN74LV1T125DBV, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

13 boardsClear filters|Most starred

How designs wire the SN74LV1T125DBV

Read from the KiCad layouts of 11 open source designs, one per repository: what each pin of the SN74LV1T125DBV connects to, and the resistors, capacitors and other passives placed on it.

  • The OE pin is tied to GND on 10 of 11 designs.
  • The Y pin has a series resistor on 6 of 11 designs, most often 330 Ω (then 470 Ω).
  • The VCC pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 10 µF).
OEpin 1Connected to: GND 91%
GNDpin 3Connected to: GND 100%
Ypin 4Connected to: Signal 82% · 5V 18%
  • Series resistor on 55% · 330 Ω (5), 470 Ω (1)
VCCpin 5Connected to: 5V 100%
  • Decoupling capacitor on 55% · 100 nF (6), 10 µF (1)

1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include DuPal V3 by DuPAL-PAL-DUmper, Toepler plus by niektb, SHEGO16-QMK-Hall-Effect-Macropad by Charading and LK7D by lambdakb.

The SN74LV1T125DBV in open source designs

The gallery holds 13 open source boards using the SN74LV1T125DBV from 11 GitHub repositories; a typical one measures about 116.8 × 106 mm and carries around 128 components.

85% are two-layer designs, the rest use four layers or more, and 46% carry an open source license.

The most starred is DuPal V3 by DuPAL-PAL-DUmper.

Parts used alongside the SN74LV1T125DBV

Microcontrollers on boards using the SN74LV1T125DBV

SN74LV1T125DBV: common questions

Where can I find a SN74LV1T125DBV reference design?

Each of the 13 boards on this page is a real design using the SN74LV1T125DBV. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the SN74LV1T125DBV OE pin connected?

The OE pin is tied to GND on 10 of 11 designs. Counted from the KiCad layouts of 11 open source designs using the SN74LV1T125DBV.

What resistor goes on the SN74LV1T125DBV Y pin?

The Y pin has a series resistor on 6 of 11 designs, most often 330 Ω (then 470 Ω). Counted from the KiCad layouts of 11 open source designs using the SN74LV1T125DBV.

What decoupling capacitors do designs use on the SN74LV1T125DBV VCC pin?

The VCC pin has a decoupling capacitor on 6 of 11 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 11 open source designs using the SN74LV1T125DBV.

What parts are used alongside the SN74LV1T125DBV?

The USBLC6-2SC6, AMS1117-3.3, RP2040 and W25Q128JVS appear in the most repositories here.

Which microcontrollers do boards using the SN74LV1T125DBV use?

Most are built on RP2040/RP2350 (4), Nordic nRF (3), STM32 (3) and NXP (1).

How big is a typical board using the SN74LV1T125DBV?

The median is 116.8 × 106 mm, and 85% are two-layer designs.

What is the most popular open source board using the SN74LV1T125DBV?

By GitHub stars, DuPal V3 by DuPAL-PAL-DUmper, with 57 stars.

Can I simulate one of these boards using the SN74LV1T125DBV before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part