5 open source boards using the SN74LV1T34
Real designs built with the SN74LV1T34, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
LimeRFE
myriadrf
141.1 × 178.5 mm1325 partsNo license28AllWizeK1-hardware
AllWize
68.6 × 53.4 mm43 partsLGPL-2.13STM32
Water level monitoring - main board
Contrix
73.7 × 48.3 mm54 parts2LNo license0ESP32
Pax-DLED
CalinRadoni
50 × 48 mm39 parts2LGPL-3.00ESP8266
Water level monitoring - support board
Contrix
58.4 × 55.9 mm46 parts2LNo license0
The SN74LV1T34 in open source designs
The gallery holds 5 open source boards using the SN74LV1T34 from 4 GitHub repositories; a typical one measures about 68.6 × 53.4 mm and carries around 46 components.
100% are two-layer designs, the rest use four layers or more, and 40% carry an open source license.
The most starred is LimeRFE by myriadrf.
Microcontrollers on boards using the SN74LV1T34
What boards using the SN74LV1T34 are built for
SN74LV1T34: common questions
Where can I find a SN74LV1T34 reference design?
Each of the 5 boards on this page is a real design using the SN74LV1T34. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
Which microcontrollers do boards using the SN74LV1T34 use?
Most are built on AVR/Arduino (1), ESP32 (1), ESP8266 (1) and STM32 (1).
How big is a typical board using the SN74LV1T34?
The median is 68.6 × 53.4 mm, and 100% are two-layer designs.
What is the most popular open source board using the SN74LV1T34?
By GitHub stars, LimeRFE by myriadrf, with 28 stars.
Can I simulate one of these boards using the SN74LV1T34 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.