2 open source boards using the SN74LVC07ADBR
Real designs built with the SN74LVC07ADBR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
AVR/Arduino
Hw openmower yardforce
xtech
180 × 170 mm275 parts4LCC-BY-4.012Hw openmower sabo
xtech
254 × 115 mm322 parts6LCC-BY-NC-4.05
The SN74LVC07ADBR in open source designs
The gallery holds 2 open source boards using the SN74LVC07ADBR from 2 GitHub repositories; a typical one measures about 217 × 142.5 mm and carries around 299 components.
100% use four copper layers or more, and 50% carry an open source license.
The most starred is Hw openmower yardforce by xtech.
Parts used alongside the SN74LVC07ADBR
Microcontrollers on boards using the SN74LVC07ADBR
What boards using the SN74LVC07ADBR are built for
SN74LVC07ADBR: common questions
Where can I find a SN74LVC07ADBR reference design?
Each of the 2 boards on this page is a real design using the SN74LVC07ADBR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the SN74LVC07ADBR?
The 2.54mm 1x5 socket, 2.54mm 1x6 socket, 2.54mm 1x9 socket, 2.54mm 2x2 socket and 2.54mm 2x6 socket appear in the most repositories here.
Which microcontrollers do boards using the SN74LVC07ADBR use?
Most are built on AVR/Arduino (1).
How big is a typical board using the SN74LVC07ADBR?
The median is 217 × 142.5 mm, and 0% are two-layer designs.
What is the most popular open source board using the SN74LVC07ADBR?
By GitHub stars, Hw openmower yardforce by xtech, with 12 stars.
Can I simulate one of these boards using the SN74LVC07ADBR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.