15 open source boards using the SN74LVC1G17DCKR

Real designs built with the SN74LVC1G17DCKR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

15 boardsClear filters|Most starred

How designs wire the SN74LVC1G17DCKR

Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the SN74LVC1G17DCKR connects to, and the resistors, capacitors and other passives placed on it.

  • The OUT pin has a series resistor on 4 of 5 designs, most often 100 Ω (then 0 Ω).
  • The IN pin has a resistor to GND on 3 of 5 designs, most often 10 kΩ.
  • The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 1 µF).
NCpin 1Connected to: Not connected 80% · 3.3V 20%
INpin 2Connected to: The microcontroller 40% · 5V 20%
  • Resistor to GND on 60% · 10 kΩ (3)
GNDpin 3Connected to: GND 80% · a signal 20%
OUTpin 4Connected to: Signal 80% · GND 20%
  • Series resistor on 80% · 100 Ω (4), 0 Ω (1)
VCCpin 5Connected to: 3.3V 60% · a signal 40%
  • Decoupling capacitor on 60% · 100 nF (5), 1 µF (2), 10 µF (1)

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Thunderscope Rev5.3 by EEVengers, Opensync by ErichZimmer, SIG COND by Han-ZenX and Zynqinator by rkarl2.

The SN74LVC1G17DCKR in open source designs

The gallery holds 15 open source boards using the SN74LVC1G17DCKR from 5 GitHub repositories; a typical one measures about 160 × 100 mm and carries around 217 components.

87% use four copper layers or more, and 93% carry an open source license.

The most starred is Thunderscope Rev5.3 by EEVengers.

Microcontrollers on boards using the SN74LVC1G17DCKR

What boards using the SN74LVC1G17DCKR are built for

SN74LVC1G17DCKR: common questions

Where can I find a SN74LVC1G17DCKR reference design?

Each of the 15 boards on this page is a real design using the SN74LVC1G17DCKR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the SN74LVC1G17DCKR OUT pin?

The OUT pin has a series resistor on 4 of 5 designs, most often 100 Ω (then 0 Ω). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G17DCKR.

What resistor goes on the SN74LVC1G17DCKR IN pin?

The IN pin has a resistor to GND on 3 of 5 designs, most often 10 kΩ. Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G17DCKR.

What decoupling capacitors do designs use on the SN74LVC1G17DCKR VCC pin?

The VCC pin has a decoupling capacitor on 3 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the SN74LVC1G17DCKR.

What parts are used alongside the SN74LVC1G17DCKR?

The ADA4930-1YCPZ-R7, BUF802IRGTR, FIN1019MTCX, HMCAD1520 and LM27761DSGR appear in the most repositories here.

Which microcontrollers do boards using the SN74LVC1G17DCKR use?

Most are built on RP2040/RP2350 (12) and FPGA (3).

How big is a typical board using the SN74LVC1G17DCKR?

The median is 160 × 100 mm, and 13% are two-layer designs.

What is the most popular open source board using the SN74LVC1G17DCKR?

By GitHub stars, Thunderscope Rev5.3 by EEVengers, with 1,336 stars.

Can I simulate one of these boards using the SN74LVC1G17DCKR before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part