18 open source boards using the SN74LVC1G3157DBVR
Real designs built with the SN74LVC1G3157DBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
PS2VGA
jeffqchen
30.8 × 22.8 mm28 parts2LCC-BY-SA-4.032MinicalcControlPanel
John-Lluch
144 × 126 mm319 parts4LNo license10Motherboard
morzack
125 × 85 mm194 parts4LNo license1STM32
ETH1CLCR2
BehrensG
160 × 100 mm591 parts6LNo license0After
DD1SB
180 × 140 mm287 parts2LMIT0MiniCalc A
John-Lluch
157 × 70 mm245 parts4LNo license10Before
DD1SB
180 × 140 mm287 parts2LMIT0Amod c
gallicchio
100 × 100 mm211 parts4LCERN-OHL-P-2.00NXP
Dual PDH Laser driver v3
scular-HCC
291.8 × 265.6 mm197 parts2LCustom license0Dfm-2oz
DD1SB
180 × 140 mm287 parts2LMIT0NXP
DIG Card
scular-HCC
160 × 100 mm187 parts6LCustom license0Dfm special finish
DD1SB
180 × 140 mm287 parts2LMIT0E2-native
DD1SB
180 × 140 mm287 parts2LMIT0E4-native
DD1SB
180 × 140 mm287 parts2LMIT0E4R1-baseline
DD1SB
180 × 140 mm287 parts2LMIT0RF2M
DD1SB
150 × 110 mm287 parts2LMIT0Sliver only
DD1SB
180 × 140 mm287 parts2LMIT0Strict before
DD1SB
180 × 140 mm287 parts2LMIT0
How designs wire the SN74LVC1G3157DBVR
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the SN74LVC1G3157DBVR connects to, and the resistors, capacitors and other passives placed on it.
- The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 nF).
- The A pin has a series resistor on 4 of 7 designs, most often 1 kΩ (then 36 Ω).
- The S pin has a series resistor on 4 of 7 designs, most often 10 kΩ (then 36 Ω).
- The B2 pin has a series resistor on 3 of 7 designs, most often 10 kΩ (then 10 Ω).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| B2pin 1 | Connected to: Signal 71% · VCC 29% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| Apin 4 | Connected to: Signal 100% |
|
| VCCpin 5 | Connected to: 3.3V 86% |
|
| Spin 6 | Connected to: SN74LVC1G3157DBVR 29%, a connector 29% |
|
1 more pin varies from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include PS2VGA by jeffqchen, MiniCalc A by John-Lluch, Motherboard by morzack and ETH1CLCR2 by BehrensG.
The SN74LVC1G3157DBVR in open source designs
The gallery holds 18 open source boards using the SN74LVC1G3157DBVR from 7 GitHub repositories; a typical one measures about 180 × 140 mm and carries around 287 components.
67% are two-layer designs, the rest use four layers or more, and 67% carry an open source license.
The most starred is PS2VGA by jeffqchen.
Parts used alongside the SN74LVC1G3157DBVR
What boards using the SN74LVC1G3157DBVR are built for
SN74LVC1G3157DBVR: common questions
Where can I find a SN74LVC1G3157DBVR reference design?
Each of the 18 boards on this page is a real design using the SN74LVC1G3157DBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the SN74LVC1G3157DBVR VCC pin?
The VCC pin has a decoupling capacitor on 5 of 7 designs, most often 100 nF (then 10 nF). Counted from the KiCad layouts of 7 open source designs using the SN74LVC1G3157DBVR.
What resistor goes on the SN74LVC1G3157DBVR A pin?
The A pin has a series resistor on 4 of 7 designs, most often 1 kΩ (then 36 Ω). Counted from the KiCad layouts of 7 open source designs using the SN74LVC1G3157DBVR.
What resistor goes on the SN74LVC1G3157DBVR S pin?
The S pin has a series resistor on 4 of 7 designs, most often 10 kΩ (then 36 Ω). Counted from the KiCad layouts of 7 open source designs using the SN74LVC1G3157DBVR.
Which microcontrollers do boards using the SN74LVC1G3157DBVR use?
Most are built on NXP (2) and STM32 (1).
How big is a typical board using the SN74LVC1G3157DBVR?
The median is 180 × 140 mm, and 67% are two-layer designs.
What is the most popular open source board using the SN74LVC1G3157DBVR?
By GitHub stars, PS2VGA by jeffqchen, with 32 stars.
Can I simulate one of these boards using the SN74LVC1G3157DBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.